Installation

________________________WARNING __________________________

In the following step, use sufficient personnel to move the cabinet off the pallet. The cabinet weighs 80.74 kg (178 lb) empty, and can weigh up to 420.94 kg (928 lb) fully configured.

If equipment is installed in the cabinet, the cabinet may become top heavy and could accelerate rapidly down the ramps if not restrained. Be prepared to guide and control the motion of the cabinet.

____________________________________________________________

9.Refer to Figure 2-3 and roll the cabinet down the ramps using sufficient personnel for safety.

10.Wheel the cabinet to the desired location.

11.Adjust the leveler feet downward so that the cabinet is level and the load is removed from the casters.

_________________________ Caution ___________________________

Ensure that the leveler feet extend enough to carry the load of the cabinet so that the casters spin freely. If not, damage to the casters will result over an extended period of time.

____________________________________________________________

H9A11 Cabinet Installation/Owner's Guide 2–7