Installation

6.Refer to Figure 2-2. Remove the four shipping bolts ûand brackets üthat secure the four cabinet leveler feet †to the pallet ú.

__________________________ Note _____________________________

The ramps attach to the front of the pallet. Therefore, the cabinet will have to be rolled frontwards down the ramps.

____________________________________________________________

7.Remove the ramps °from the shipping carton and set the ramps in the holes ¢ provided at the front of the pallet ú. Ensure that the arrows èon the ramps match the pallet arrows êas shown in Figure 2-2.

_________________________ Caution ___________________________

In the next step, the leveler feet must be fully retracted to prevent contact with the ramp or the floor when the cabinet is unloaded from the pallet.

____________________________________________________________

8.Adjust the four cabinet leveler feet †and the leveler foot on the stabilizer bar ëto the maximum upward position.

H9A11 Cabinet Installation/Owner's Guide 2–5