Computer Input
Computer System Selection
This projector can detect most of the current computer systems with the
Auto | When the projector cannot recognize the connected PC System Menu | |
signal as PC system provided in this projector, the Auto | ||
| ||
| PC Adjustment function operates to adjust the projector | |
| and the message “Auto” is displayed in the PC System | |
| Menu icon. When the image is not provided properly, | |
| manual adjustment is required. (p26, 27) | |
| There is no signal input from the connected computer. | |
– – – – | ||
Check the connection of the computer and see if the | ||
| ||
| projector is set correctly. | |
| (See “Troubleshooting” on page 45.) | |
| User preset adjustment in Computer Adjustment. | |
Mode 1 | ||
Adjustment data can be stored in Mode 1 - 5. (page 27, | ||
| ||
| 28.) | |
| Computer systems provided in the projector. The | |
SVGA 1 | ||
projector chooses a proper system and displays it. | ||
|
The Auto PC Adjustment func- tion operates to adjust the pro- jector.
*Mode 1 and SVGA 1 are examples.
PC system can also be selected manually if some PC systems appear on the
1 | Press the MENU button and the |
| Press the Point Left/Right buttons to move the red frame |
| pointer to the PC System Menu icon. |
2 | Press the Point Down button to move the red arrow pointer to |
| the system that you want to set, and then press the SELECT |
button.
PC System Menu
The PC System Menu icon displays the system being selected.
The systems on this dialog box can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p27, 28)
25