Christie Digital Systems 38-VIV208-01 user manual Image Level Adjustment

Page 30

Computer Input

Image Level Adjustment

1

Press the MENU button and the On-Screen Menu will appear.

 

Press the Point Left/Right button to move the red frame pointer

 

to the Image Adjust Menu icon.

2

Press the Point Down button to move the red frame pointer to

 

the item that you want to adjust, and then press the SELECT

button. The level of each item is displayed. Adjust each level by pressing the Point Left/Right button.

Contrast

Press the Point Left button to decrease contrast and the Point Right button to increase contrast. (From 0 to 63.)

Brightness

Press the Point Left button to adjust image darker and the Point Right button to adjust image brighter. (From 0 to 63.)

Color temp.

Press the Point Left button or the Point Right button for Color temp. level that you want to select. (XLow, Low, Mid, or High)

White balance (Red)

Press the Point Left button to lighten red tone and the Point Right button to deepen red tone. (From 0 to 63.)

White balance (Green)

Press the Point Left button to lighten green tone and the Point Right button to deepen green tone. (From 0 to 63.)

White balance (Blue)

Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From 0 to 63.)

Sharpness

Press the Point Left button to soften the image and the Point Right button to sharpen the image. (From 0 to 15.)

Gamma

Press the Point Left/Right button to obtain better balance of contrast. (From 0 to 15.)

Reset

Resets all adjustment to their previous levels.

Store

To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image 1 to 4 where you want to set and then press the SELECT button.

Quit

Closes the Image Adjust Menu.

Image Adjust Menu

Image Adjust Menu icon

Move the red frame pointer to the item to be selected and then press the SELECT button.

Selected Image level

Press the Point Left/Right but- ton to adjust value.

Store icon

Press the SELECT button at this icon to store the adjust- ment.

Image Level Menu

Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button.

30

Image 30
Contents Model Table of Contents To the User Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Safety InstructionsInstalling the Projector in Proper Position Moving the ProjectorCompliance Federal Communication Commission NoticeFor the U.S.A. and Canada ComplianceFor Continental Europe 200 240 V ACFeatures and Design Back Part Names and FunctionsFront BottomPart Names and Functions TerminalPower ON-OFF button TopRemote Control Signal Emission indicatorLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationInstallation Adjustable FeetPositioning the Projector Installation Connecting to a ComputerConnecting to Video Equipment TerminalsProjector Basic Operation Turning On the ProjectorTurning Off the Projector Keystone Adjustment Zoom AdjustmentFocus Adjustment Basic OperationNo Show Function Timer FunctionSound Adjustment Direct OperationTop Control Remote ControlOn-Screen Menu On-Screen MenuMenu Bar Computer Input Input Source SelectionAuto Computer InputComputer System Selection ModeComputer Adjustment Auto To store adjustment dataAuto PC Adj Computer Adjustment Manual Display area To store adjustment data ResetMode free To clear adjustment dataReal Image Level SelectionStandard Image button Standard RealImage Level Adjustment Screen Size Adjustment Input button Video Computer Video button Video Video InputInput Source Selection Video, S-Video AutoComponent RGB Scart Video InputInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonComponent Video System SelectionVideo or S-Video AV System Menu Video or S-VideoCinema Image button Standard CinemaColor TintProgressive Resets all adjustment to their previous figure Setting SettingSetting To change the code for the remote control To change the code for the projectorMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the items below Cleaning the Projection Lens Maintenance and CleaningCleaning the Air Filters Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixService AppendixIndicators and Projector Condition Projector ConditionMenu Tree PC AdjustImage Select Image Adjust Screen Input575pSetting Image SelectCompatible Computer Specifications FreqKHz Technical Specifications Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Pin Configuration Optional Parts USB Connector Series BTerminal Mini DIN 8-PIN Pin Configuration MAC Adapter DVI Cable COMPONENT-VGA Cable SCART-VGA CableAttaching the Lens Cover Page Part No -A 610 309 1143 1AA6P1P4208-- MT3K