Christie Digital Systems 38-VIV208-01 Video Input, Input Source Selection Video, S-Video, Auto

Video Input

Input Source Selection (Video, S-Video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Video

Computer 1

Computer 2

VIDEO button Video

✽

✽When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed.

Menu Operation

1	Press the MENU button and the On-Screen Menu will appear.
	Press the Point Left/Right button to move the red frame pointer
	to the Input Menu icon.
2	Press the Point Down button to move the red arrow pointer to
	Video and then press the SELECT button. The Source Select
	Menu will appear.
3	Move the pointer to the source that you want to select and then
	press the SELECT button.
		When selecting Auto, the projector automatically detects
	Auto
		incoming video signal, and adjusts itself to optimize its
		performance. The projector selects connection in the
		following order:
		1st S-Video
		2nd Video
		The S-VIDEO jack has priority over the VIDEO jack under
		the condition of connecting both the S-VIDEO jack and
		the VIDEO jack.
		When video input signal is connected to the VIDEO jack,
	Video
		select Video.
		When video input signal is connected to the S-VIDEO
S-Video
		jack, select S-Video.

Input Menu

	Move the pointer to
VIDEO	Video and press the
	SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

✽When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed.

NOTE

●See “Computer Input” on page 24 for a signal compatible with HDCP.

32