Christie Digital Systems 38-VIV205-01 Basic Operation, Adjusting Screen, Zoom Adjustment

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1	Press ZOOM button on Top control panel or ZOOM ▲/▼ button
	on Remote Control Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button or the POINT UP button to make image
	larger, and press ZOOM ▼ button or the POINT DOWN button

to make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press FOCUS button on Top control panel or FOCUS ▲ /▼
	button on Remote Control Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button or the
	POINT UP/DOWN button(s) .

NOTE;

Focus adjustment may not function properly if the image is corrected by KEYSTONE adjustment.

Focus

Message disappears after 4 seconds.

LENS SHIFT ADJUSTMENT

1 Press LENS SHIFT button on Top control panel or LENS SHIFT

▲/▼ button on Remote Control Unit. Message “Lens shift” is displayed.

2	Press the POINT UP button or LENS SHIFT ▲ button to move
	image up, press the POINT DOWN or LENS SHIFT ▼ button to

move image down.

�

Lens shift

�

�

	KEYSTONE ADJUSTMENT
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1	Press KEYSTONE button on Remote Control Unit or select
	Keystone on SETTING menu. (Refer to page 35.) Keystone
	dialog box appears.
2	Correct keystone distortion by pressing the POINT
	UP/DOWN/LEFT/RIGHT button(s). Press the POINT UP button	• Arrows are white in no correction.
	to reduce the upper part of the image, and press the POINT
		• Arrow(s) of direction being corrected turn(s) red.
	DOWN button to reduce the lower part. Press the POINT LEFT	• Arrow(s) disappear(s) at the maximum
	button to reduce the left part, and press the POINT RIGHT	correction.
	button to reduce the right part.

Reduce the upper width	Reduce the lower width with
	the POINT DOWN button.
with the POINT UP button.

Reduce the left part with the POINT LEFT button.

Reduce the right part with the POINT RIGHT button.

20