Setting Menu

SETTING

1	Press MENU button and ON-SCREEN MENU will appear. Press
1	the POINT LEFT/RIGHT button(s) to move a red-frame pointer
	to SETTING icon.
2	Press the POINT DOWN button to move a red-frame pointer to
2	item that you want to set and then press SELECT button.

Setting dialog box appears.

Language

Language used in ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean and Japanese.

Keystone

When image is distorted, select Keystone. The ON-SCREEN MENU will disappear and the Keystone dialog box will appear. Correct keystone distortion by pressing the POINT UP/DOWN/LEFT/RIGHT button(s). Refer to KEYSTONE ADJUSTMENT on page 20.

Blue back

When this function is “On,” this projector will produce a blue image instead of video noise on screen when any input source is unplugged or turned off.

Display

SETTING MENU

Set a red frame	SETTING Menu icon
pointer to item and
press SELECT
button.

When pressing SELECT button at Language, Language Menu appears.

This function decides whether to display On-Screen Displays. On ···shows all On-Screen Displays.

Off ····sets On-Screen Displays disappeared except;

●ON-SCREEN MENU

●“Power off?” message

Logo

When this function is “On,” the projector displays the “CHRISTIE” logo when starting up.

Ceiling

When this function is “On,” picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector.

Rear

When this function is “On,” picture is left / right reversed. This function is used to project image to a rear projection screen.

Move a pointer to item and then press the POINT LEFT/RIGHT button(s).

Ceiling function

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, projector lamp and READY indicator are turned off.

3.When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top control panel or on Remote Control Unit again.

Rear function

Time left until Lamp off.