Christie Digital Systems 38-VIV205-01 Computer Input, Selecting Input Source, Input Menu

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select the appropriate input signal by pressing the INPUT button on the Top control panel or on the Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

INPUT button

Input 1

Input 2

Input 3

	MENU OPERATION
1	Press MENU button and ON-SCREEN MENU will appear. Press
	the POINT LEFT/RIGHT buttons to select Input and press
	SELECT button. Another dialog box INPUT SELECT Menu will	INPUT Menu icon
	appear.
2	Press the POINT DOWN button and a red-arrow icon will
	appear. Move arrow to INPUT source that you want to select,

and then press SELECT button.

SELECTING COMPUTER SYSTEM

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

1	Press MENU button and ON-SCREEN MENU will appear. Press
	the POINT LEFT/RIGHT button to move the red frame pointer to
	INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	Input 1 and then press SELECT button. Source Select Menu will
	appear.
3	Move the pointer to either Digital or Analog and then press
	SELECT button.
		When your computer is connected to COMPUTER
Digital
		INPUT (DIGITAL) terminal, select RGB (Digital).
		When your computer is connected to COMPUTER INPUT
Analog
		(ANALOG) terminal, select RGB (Analog).

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 1 and press SELECT button.

Input 1

Source Select Menu

Move the pointer to Digital or Analog and press SELECT button.

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	the POINT LEFT/RIGHT button to move the red frame pointer to
	INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	Input 2 and then press SELECT button. Source Select Menu will
	appear.
3	Press the POINT DOWN button and a red-arrow icon will
	appear. Move arrow to "RGB", and then press SELECT button.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press SELECT button.

Input 2

Source Select Menu

Move the pointer to RGB and press SELECT button.

22