VIDEO INPUT
IMAGE LEVEL ADJUSTMENT
1 | Press MENU button and |
the POINT LEFT/RIGHT button(s) to move the red frame pointer | |
| to IMAGE ADJUST Menu icon. |
2 | Press the POINT DOWN button to move the red frame pointer to |
the item you want to adjust and then press SELECT button. The |
IMAGE ADJUST MENU
Move the red frame pointer to
IMAGE ADJUST
level of each item is displayed. Adjust each level by pressing the POINT LEFT/RIGHT button(s).
Contrast
Press the POINT LEFT button to decrease contrast, and the POINT RIGHT button to increase contrast. (From 0 to 63.)
the item to be selected and then press SELECT button.
Menu icon
Brightness
Press the POINT LEFT button to decrease brightness, and the POINT RIGHT button to increase brightness. (From 0 to 63.)
Color
Press the POINT LEFT button to lighten color, and the POINT RIGHT button to deeper color. (From 0 to 63.)
Tint
Press the POINT LEFT button or the POINT RIGHT button to obtain proper color. (From 0 to 63.)
White balance (Red)
Press the POINT LEFT button to lighten red tone and the POINT RIGHT button to enhance red tone. (From 0 to 63.)
White balance (Green)
Press the POINT LEFT button to lighten green tone and the POINT RIGHT button to enhance green tone. (From 0 to 63.)
White balance (Blue)
Press the POINT LEFT button to lighten blue tone and the POINT RIGHT button to enhance blue tone. (From 0 to 63.)
Sharpness
Press the POINT LEFT button to soften image, and the POINT RIGHT button to sharpen image. (From 0 to 15.)
Gamma
Press either the POINT LEFT button or the POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)
Noise reduction
Press the POINT LEFT/RIGHT button(s) to enable noise reduction mode. Dialog box display is changed to “On” to reduce noises (rough parts) from the image. Press the POINT LEFT/RIGHT button(s) again to change the noise reduction mode to “Off”.
Progressive scan
Press the POINT LEFT/RIGHT button(s) to enable progressive scan mode. Dialog box display is changed to “Off” and progressive scan mode is set to “Off”. Press the POINT LEFT/RIGHT button(s) again to change the progressive scan mode to “On”.
Press the POINT LEFT/RIGHT but- tons to adjust value.
Press SELECT button at this icon to display other items.
Press SELECT button at this icon to display previous items.
Press the POINT LEFT/RIGHT but- tons to adjust value.
Press SELECT button at this icon to store value.
NOTE :
Tint can not be adjusted when video system is PAL, SECAM,
Noise Reduction can not be operated when video signal types and systems as follow.
●Composite video signal (SECAM, NTSC4.43,
●
●Component video signal.
Progressive can not be operated when “480p”, “575p”, “720p”, “1035i” or “1080i” is selected on AV SYSTEM MENU (P31).
33