Christie Digital Systems 38-VIV205-01 user manual Computer Input Manual PC Adjustment

Page 24

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by the Multi- Scan system of this projector. If this happens, the projector can not reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu can not be operated when a digital signal is input to the DVI terminal or “RGB” is selected on PC SYSTEM MENU (P23).

1

Press MENU button and ON-SCREEN MENU will appear. Press

the POINT LEFT/RIGHT button to move the red frame pointer to

 

PC ADJUST Menu icon.

2

Press the POINT DOWN button to move the red frame pointer to

the item that you want to adjust and then press SELECT button.

Adjustment dialog box will appear. Press the POINT LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the POINT LEFT/RIGHT button(s) to adjust position.

Vertical

Adjusts vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust position.

Current mode

Press SELECT button to show information of computer selected.

Clamp

Adjusts clamp position. When image has a dark bar(s), try this adjustment.

PC ADJUST MENU

PC ADJUST Menu icon

Move the red frame icon to the item and press SELECT button.

 

Shows status

Selected Mode

(Stored / Free) of the

selected Mode.

 

Press the POINT LEFT/RIGHT button to adjust the value.

Press SELECT button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”

Current mode

Press SELECT button at Current mode icon to show information of computer connected.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact Design Digital Zoom for ComputerPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Preparation Lens Installation Lens Shift AdjustmentPositioning Projector Preparation Adjustable Feet Moving ProjectorConnecting Projector USB Connector Series BTerminals of Projector Audio Input JacksConnecting to Computer Terminals ProjectorConnecting to Video Equipment Audio VideoOperation of Remote Control Before OperationLaser Pointer Function Volume Button Wired Remote JackZoom Button Focus ButtonTOP Control Panel and Indicators Ready IndicatorHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowSound Menu Turning on / OFF Projector Turning on ProjectorTurning OFF Projector Adjusting Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Computer Input Selecting Input SourceSelecting Computer System Input MenuPC Adjustment Auto PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Computer Input Display areaDisplay area H Full screenComputer Input Compatible Computer Specifications Resolution640 x 31.469 59.940 1024 x 48.363 60.004Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoComponent Video Signal Format Selecting Video SystemVideo Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Video Input Image Level Adjustment To function that you want to select and then press Select Setting Setting MenuSetting Menu To change code of Remote Control Unit Wireless Mouse modeProjector mode To change code of ProjectorSETTING/APPENDIX Operating Wireless MouseInstallation Operating Wireless MouseMaintenance AIR Filter Care and CleaningCleaning Projection Lens Appendix Lamp Replacement Lamp Replace CounterTroubleshooting Service Technical Specifications Appendix Configurations of Terminals USB Connector Series BPart No -A 610 302 1256 1AA6P1P3605-- MB8KM
Top Page Image Contents