Acer X223HQ, X213H manual External Controls, Front panel controls

Operating Instructions Chapter 2

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences.

•The power cord should be connected.

•Connect the video cable from the monitor to the video card.

•Press the power button to turn on the monitor position. The power indicator will light up.

External Controls

Front panel controls

1.Power Switch	To turn ON or OFF the power.
2.Power LED	Lights up to indicate the power is turned ON.
3.Empowering / Exit	1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
	OSD menu).
	2) When OSD menu is in off status, press this button to select scenario mode.
	3) When exit eColor OSD, it will activate the Auto Adjustment function
4.Auto Adjust button /	1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
Exit	OSD menu).
	2) When OSD menu is in off status, press this button for 2 seconds to activate the
	Auto Adjustment function .The Auto Adjustment function is used to set the Hpos,
	Vpos, Clock and Focus.
5.< / >	Press < or > to select the desired function. Press < or > to change the settings of
	the current function.
6.MENU / ENTER	Activate OSD menu when OSD is OFF or activate/de-activate adjustment
	function when OSD is ON.

21