Acer RB23WABAS service manual S11

4. Assembly and Disassembly Procedures (continued)

ACER H233H 15

Go to cover page

	Plug 2 lamp cables to the connectors of inverter	S11	Use a Phillips-head screwdriver screw 3 screws
S7	board.		(No1~2 Screw Size=M3x10;No3 screw size=M3*6

Torque=4~6KGFxCM).

2 1 3

Use a Hex-head screwdriver screwed the DVI and

S8	D-SUB connectors (No.1~4 Hex Nut screws
	Size=M3x8;Torque=4~6KGFxCM).

	Stick the safety tape
S12	Connect OSD key cable into interface board(P306)

2 1

4 3

1

Take out the USB cable to through out the hole.

S9 3 2

Use a Phillips-head screwdriver screw 4 screws

S10 (No1~4 Screw Size=M3x6; Torque=2.5~3KGFxCM).

2 1

4 3

Use a Phillips-head screwdriver screwed the

S13 No.1~2(No1~2 screw size=M3x6; Torque=9~10 KGFxCM).

Connect the USB cable.

1

2