7. Writing EDID Process
ACER H233H |
| 37 |
Go to cover page
Hardware Configuration:
1.Connect the PRINTER PLUG of DDC FIXTURE with the printer port of Desktop PC.
2.Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3Use DVI cable connect to the DVI socket of monitor of DDC FIXTURE.
4Take a video cable then connect the
5.
Writing EDID for VGA and DVI
S1 Chose the folder:”
PARALLEL CONNECTION
S2 Select Model: Key in password”cedid” then select
USB CONNECTIONmodel which one you want to write EDID code that it depends on panel type.
DVI CONNECTION
VGA CONNECTION
S1 Open EDID Write protection function
Turn off the power,then press force on “ POWER ” and “ E
”button at the same time then press on “ MENU ”button to enter factory mode.
Select “EDID WP” to let it be off.
Note: Please pay attention ,Don’t change any parameter
which is measured by precise machine before shipping
out. | cedid |
|