20
ACER H233H
4. Assembly and Disassembly Procedures (continued)
Go to cover page
Put the dissembled monitor closed to by myself | Separating all of the locking mechanism of the |
S8 | S12 front bezel in turn. |
UP SIDE
RIGHT SIDE
DOWN
SIDE
LEFT SIDE
S9
S10
Turn over the LCD monitor (screen faced up).
Wedge your finger between the front bezel and the panel, then pry up on the front bezel to disengage the locking mechanism.
Note: The dissemble method of front bezel is
Hold the one upside corner of the front bezel after S13 separating the upside of the front bezel
as the below photos description, although the
photos from S9 to S13 are not suitable for this
Using properly force to pull up front bezel that
model.
will let the locking mechanism of left side, right side and down side separated.
Insert steel rule between panel and front bezel
S11 .Using properly force to let the locking mechanism of front bezel and rear cover separated