Acer RB23WABAS service manual Osd

2. OSD Manu (continued)

ACER H233H

9

f. Item page status

Status	Display type
Non-focus

Item focused

Item selected

The description for control function

Key	Function description
Power	Power off the monitor
<	Moving the focus up
>	Moving the focus down
	Enter to the item page
Menu	1. It has no function at the information
	page.
Auto	Exit the OSD menu
e	Trigger the acer eColor Management

Key	Function description
Power	Power off the monitor
<	Moving the focus up
>	Moving the focus down
Menu	Select function item for adjustment
Auto	Exit from the item page to icon place
e	Trigger the acer eColor Management

Key	Function description
Power	Power off the monitor
<	Decrease the setting value for target item
>	Increase the setting value for target item
Menu	No function
Auto	Exit from item selected status
e	Trigger the acer eColor Management

Acer eColor management

a. Display acer eColor Management OSD when user press “e” button on the front bezel or trigger this function in OSD menu/picture page.

b. Layout as following figure 1-8

Go to cover page

c. The definition of color & size for the acer eColor management

OSD

d. Icons introduction

Scenario mode:

Mode	Contrast (OSD)		Brightness (OSD)
User mode	(User defined)		(User defined)
Text mode	50	(slope 1.0)	44 (61%)
Standard mode	50	(slope 1.0)	77 (85%)
Graphics mode	60	(slope 1.04)	97 (98%)
Movie mode	56	(slope 1.025)	77 (85%)

Note: The contrast/brightness value of modes should be adjusted by requirement.

Operation method:

Step 1: Press “e” key to initial scenario mode.

Step 2: Press “>” or “<” key to select the mode you want (not cyclic).

Step 3: If user has NO action after Step 2, OSD will disappear after 10 sec and do “auto scan” (mode keep in original one, no change).

If user press “e” key after Step 2, it means user confirm the chosen mode and monitor will do “auto scan” as well.