INTRODUCTION
PAGE 9
Identification
of
Controls
(Cont’d)
Rear Panel
*REMOTE CONTROL IN/OUT jacks
COAXIAL DIGITAL AUDIO OUT jack
VIDEO OUTPUT SELECT Switch
AUDIO OUT 2 (L/R) jacks
COMPONENT VIDEO OUT (CB, CR, Y) jacks
AUDIO OUT 1 (L/R) jacks
VIDEO OUT jack
OPTICAL DIGITAL AUDIO OUT jack
Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust.
Dust protection cap
**REMOTE CONTROL INTERNAL/EXTERNAL Switch
POWER CORD
Connect to an AC 120V, 60Hz outlet only.
*REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component using a supplied System Control cable, you can remotely operate the components as a single system.
•When connecting to component with a remote sensor (such as the
•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the "REMOTE CONTROL OUT" jack of this DVD player.
**Remote switch
•When using this DVD player independently, set this switch to "INTERNAL". When using this DVD player in a sys- tem with a Marantz tuner or timer equipped with a remote sensor, set the switch to "EXTERNAL".
