PAGE 14
CONNECTIONS
Connecting
to
an
Audio
System
You can listen to the sound of audio CDs and DVD video discs in stereo.
To AUDIO OUT (L/R)
To |
If the TV has an
To VIDEO OUT
To
Video cable (Supplied) | To video input |
TV or monitor with audio/video inputs
To audio inputs
Audio cable (Supplied)
Audio system
Notes
❍Refer to the owner’s manual of your audio system as well.
❍Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
❍If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner and radio.
❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting Digital Audio Output” on page 41).
