BOXLIGHT CP-12tA Adjusting Screen, Focus Adjustment, Keystone Adjustment, Picture Freeze Function

BASIC OPERATION

ADJUSTING SCREEN

	ZOOM ADJUSTMENT
1	Press the ZOOM button on the Top Control or the ZOOM ▲/▼
	button on Remote Control. The message “Zoom” is displayed.
2	Press the ZOOM ▲ button or POINT UP button to make image
	larger, and press the ZOOM ▼ button or the POINT DOWN
	button to make image smaller.

Zoom

The message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press the FOCUS button on the Top Control or the FOCUS ▲/▼
	button on the Remote Control. The message “Focus” is
	displayed.
2	Adjust focus of image by pressing the FOCUS ▲/▼ button or
	the POINT UP/DOWN button(s) .

Focus

The message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1	Press the KEYSTONE button on the Remote Control or select
	Keystone on the SETTING menu. (Refer to page 36.) The

Keystone dialog box appears.

2	Correct keystone distortion by pressing the POINT UP/DOWN
	button(s) on the Top Control or on the Remote Control. Press
	the POINT UP button to reduce the upper part of the image, and
	press the POINT DOWN button to reduce the lower part.
	Reduce the upper width	Reduce the lower width with
	with the POINT UP button.	the POINT DOWN button.

•The arrows are white when there is no correction.

•The arrow disappears at the maximum correction.

•The direction of the arrow being corrected turns red.

•If you press the KEYSTONE button on the Remote Control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

PICTURE FREEZE FUNCTION

Press the FREEZE button on the Remote Control to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button.

20