BOXLIGHT CP-12tA manual Picture Screen Adjustment, Screen Menu

COMPUTER INPUT

3

Store

To store manually preset image, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image 1 to 4 where you want to set and then press the SELECT button.

Other icons operate as follows.

Reset

Reset all adjustment to their previous levels.

Quit

Closes the IMAGE MENU.

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button(s) to move the
	red frame pointer to the SCREEN Menu icon.
2	Press the POINT DOWN button and move the red frame pointer
	to the function that you want to select and then press the

SELECT button.

Normal

Provides image to fit screen size.

True

Provides image in its original size. When the original image size is larger than the screen size (800 x 600), this projector enters “Digital zoom +” mode automatically.

Wide

Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When the Digital zoom + is selected, the ON-SCREEN MENU disappears and the message “D. Zoom +” is displayed. Press the SELECT button to expand the image size. And press the POINT UP/DOWN/LEFT/RIGHT button(s) to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ button on the Remote Control.

Digital zoom –

When the Digital zoom – is selected, the ON-SCREEN MENU disappears and the message “D. Zoom –” is displayed. Press the SELECT button to compress the image size.

A projected image can be also compressed by pressing the D.ZOOM

▼button on the Remote Control.

To cancel the Digital Zoom +/– mode, press any button except the D.ZOOM ▲/▼, SELECT, and POINT buttons.

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press the SELECT button.

NOTE

●This SCREEN Menu cannot be operated when “1035i (HDTV)” or “1080i (HDTV)” is selected in the PC SYSTEM Menu (P23).

●The Wide cannot be selected when “720p (HDTV)” is selected in the PC SYSTEM Menu (P23).

●The True and Digital zoom +/– cannot be selected when “RGB” is selected in the PC SYSTEM Menu (P23).

●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.

●The image data in other than SVGA (800 x

600)is modified to fit the screen size in initial mode.

●The panning function may not operate properly if the computer system prepared in the PC ADJUST Menu is used.

30