BOXLIGHT CP-12tA manual Computer Input Image Level Adjustment, Image Adjust Menu

COMPUTER INPUT

IMAGE LEVEL ADJUSTMENT

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to move the red
	frame pointer to the IMAGE ADJUST Menu icon.
2	Press the POINT DOWN button to move the red frame pointer to
	the item that you want to adjust, and then press the SELECT

button. The level of each item is displayed. Adjust each level by pressing the POINT LEFT/RIGHT button(s).

Contrast

Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press the POINT LEFT button to lighten color and the POINT RIGHT button to deepen color. (From 0 to 63.)

Tint

Press the POINT LEFT button or the POINT RIGHT button to obtain proper color. (From 0 to 63.)

White balance (Red)

Press the POINT LEFT button to lighten red tone and the POINT RIGHT button to deepen red tone. (From 0 to 63.)

White balance (Green)

Press the POINT LEFT button to lighten green tone and the POINT RIGHT button to deepen green tone. (From 0 to 63.)

White balance (Blue)

Press the POINT LEFT button to lighten blue tone and the POINT RIGHT button to deepen blue tone. (From 0 to 63.)

Sharpness

Press the POINT LEFT button to soften the image and the POINT RIGHT button to sharpen the image. (From 0 to 15.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)

Auto grayscale

When this function is "ON", it automatically enhances contrast of bright and dark part of image.

Auto fleshtone

When this function is "ON", it automatically produces more vivid image according to image condition.

IMAGE ADJUST MENU

IMAGE ADJUST

Menu icon

Move the red frame pointer to the item to be selected and then press the SELECT button.

Selected Image level

Press the POINT LEFT/RIGHT buttons to adjust value.

Store icon

Press the SELECT button at this icon to store the adjustment.

Image Level Menu

Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button.

NOTE

●Auto grayscale cannot be operated when the input signal is digital.

29