BOXLIGHT CP-12tA manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section at the end of this booklet. If the problem still persists, contact

BOXLIGHT.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as it could possibly damage your eyes. Be especially careful that children do not stare directly into the beam.

This projector should be installed as shown. If not, it may result in a fire hazard.

Provide appropriate space on the top, sides and rear of the

 

 

 

SIDE and TOP

 

REAR

 

projector cabinet for allowing air circulation and cooling the

 

 

 

 

 

 

 

 

 

 

20cm

 

 

 

 

 

 

 

 

projector. Minimum clearance must be maintained. If the

 

 

 

 

 

 

 

 

 

 

projector is to be built into a compartment or similarly enclosed,

 

 

 

 

 

 

 

 

 

 

the minimum distances must be maintained. Do not cover the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ventilation slot on the projector. Heat build-up can reduce the

 

 

 

50cm

 

50cm

 

 

50cm

 

 

 

 

 

 

 

 

service life of your projector, and can also be dangerous.

 

 

 

 

 

 

 

 

 

 

Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.

The Remote Control, supplied to this projector, emits the laser beam as the laser pointer function from Laser Light Window while pressing the LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). Do not look into the Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents Boxlight CP-12tA To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Color Systems Features and DesignComputers Component VideoPreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord For the U.S.A. and CanadaRoom Light Adjustable FeetPreparation Positioning Projector Preparation Installing Projector in Proper Position Moving ProjectorVideo Input Jack Audio Input Jacks Connecting ProjectorTerminals of Projector Computer Input DIGITAL/ANALOGConnecting to Computer Terminals ProjectorConnecting to Video Equipment TerminalsBefore Operation Operation of Remote ControlDIP Switch in the Battery Compartment Laser Pointer FunctionRemote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Guide WindowTurning on / OFF Projector Lamp modeBasic Operation Turning on ProjectorKeystone Adjustment Adjusting ScreenFocus Adjustment Picture Freeze FunctionBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationRGB Scart RGB Digital RGB Analog Selecting Input SourceRGB Input MenuSelect Computer System Manually Selecting Computer SystemComputer Input SvgaFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentsImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOCinema Image button Standard CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Remote Control To change the code of the ProjectorAppendix Lamp ReplacementReset the Lamp Replace Counter Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning TOP ControlTroubleshooting Not work Remote Control doesWireless Mouse Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionTechnical Specifications Computer INPUT/MONITOR Output Terminal Analog Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration DVI-I Terminal DIGITAL/ANALOGOptional Parts Limited Warranty