BOXLIGHT CD-555m, CD-454m, CD-455m manual Setting UP the Projector, T , 0 5 m

Page 15

SETTING UP THE PROJECTOR

1Place the projector on a flat surface.

The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer.

If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 28 to reverse the image.

If you are installing the projector on the ceiling, refer to the installation guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling Projection” on page 27. The Ceiling Mount Kit is sold separately, see “Optional Accessories” on page 43.

2Position the projector the desired distance from the screen.

The distance from the lens of the projector to the screen and the zoom setting determine the size of the projected image. Figure 3 shows three projected image sizes. For more infor- mation about image size, see “Projected Image Size” on page 50.

1 0 f t . 3 , 0 5 m

 

6

 

 

f

 

2

t

 

.

 

.

1

 

5

,

 

f

8

 

t

m

 

.

 

0

 

 

,

 

 

7

 

 

6

 

 

m

 

 

 

20 ft.

 

5 ft.

12 ft.

 

6,1 m

 

1,5 m

3,66 m

 

 

FIGURE 3

Projected image size at minimum zoom

3 Make sure the projector and the computer are turned off.

NOTE: The projector must be at

least 5 feet (1.5 m) from the pro-

jection screen.

7

Image 15
Contents Page Safety Certifications Declaration of Conformity Page Table of Contents Index AppendixSafety Instructions If you need assistance, call Boxlight at 1-800-762-5757or Introduction Image ResolutionCompatibility Unpacking the ProjectorAnything is missing Shipping box contents Usage Guidelines If You Need Assistance WarrantyT r o d u c t i o n T , 0 5 m Setting UP the ProjectorT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector? Audio Adapter Composite video cable Audio cable Connecting a Video PlayerAudio Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Audio Menu Volume Treble BassImage Menu Manual Tracking, Horiz. Posi Horizontal position Auto source select Off Plug and Play Display messages Controls MenuRear Projection Deutsch Espanol Status Language MenuStatus Menu Time period that one video frame is displayed I n g O j e c t o r Maintenance & Troubleshooting Cleaning the LensReplacing the Projection Lamp I n t e n a n c e Troubleshooting Removing the lamp module Using the Security Lock Replacing the Batteries in the Remote ControlProblem Only the start-up screen displays Troubleshooting Problem The projector is not runningProblem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Lamp seems to be getting dimmer Problem Image and menus are reversed left to rightProblem no sound Problem Image is noisy or streakedProblem Lamp shuts off Appendix SpecificationsStandard Accessories ship with the projector AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F8 NCR Zeos Ctrl-Shift-D Using Video Mirroring with a PowerBook Computer Distance to Diagonal Width Height Screen ft/m Ft/m Projected Image SizeIndex D e Page D e Limited Warranty Limitation of Liability