BOXLIGHT CD-455m, CD-555m, CD-454m manual Status Menu

Page 38

U s i n g	t h e	P r o j e c t o r

Status Menu

This is a read-only window for informational purposes. To dis- play the status window, select Show status from the menu, then click the left or right mouse button. To remove the window, click the left or right mouse button.

Display Audio Image Controls Language			Status
Display Audio Image Controls Language			Status
			> Show status

	Lamp hours used	0039
	Computer resolution	1024x768
	Horizontal refresh rate	60.03 KHz
	Vertical refresh rate	75.04 Hz
	Mute status	off
	Source	computer 1 analog
	Software version	1.0
	Startup screen version	1.0
	Boot version	1.0
	CablePro version	1.0

FIGURE 19

Status menu

Lamp hours used

Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. After 2,000 hours of use, the message “Change Lamp” tem- porarily appears on the screen when the projector is turned on.

Change the lamp within the next 50 hours. After 2,050 hours, the LED flashes orange and the lamp will not light. See “Replacing the Projection Lamp” on page 33 for details.

Computer resolution

Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer’s user’s guide for details.

Horizontal refresh rate

The time period that one horizontal line is displayed.

30

Image 38

Contents Page Safety Certifications Declaration of Conformity Page Table of Contents Appendix IndexSafety Instructions If you need assistance, call Boxlight at 1-800-762-5757or Image Resolution IntroductionAnything is missing CompatibilityUnpacking the Projector Shipping box contents Usage Guidelines Warranty If You Need AssistanceT r o d u c t i o n Setting UP the Projector T , 0 5 mT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector? Connecting a Video Player Audio Adapter Composite video cable Audio cableAudio Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Remote Control Using the ProjectorBasic Image Adjustment I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Volume Treble Bass Audio MenuImage Menu Manual Tracking, Horiz. Posi Horizontal position Controls Menu Auto source select Off Plug and Play Display messagesRear Projection Language Menu Deutsch Espanol StatusStatus Menu Time period that one video frame is displayed I n g O j e c t o r Replacing the Projection Lamp Maintenance & TroubleshootingCleaning the Lens I n t e n a n c e Troubleshooting Removing the lamp module Replacing the Batteries in the Remote Control Using the Security LockTroubleshooting Problem The projector is not running Problem Only the start-up screen displaysProblem Image isn’t centered on the screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image is too wide or narrow for screenProblem Image is noisy or streaked Problem Image and menus are reversed left to rightProblem no sound Problem Lamp seems to be getting dimmerProblem Lamp shuts off Specifications AppendixAccessories Standard Accessories ship with the projectorOptional Accessories Portable and Laptop Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F8 NCR Zeos Ctrl-Shift-D Using Video Mirroring with a PowerBook Computer Projected Image Size Distance to Diagonal Width Height Screen ft/m Ft/mIndex D e Page D e Limited Warranty Limitation of Liability