BOXLIGHT CD-555m, CD-454m, CD-455m manual Powering up the Projector and Adjusting the Image

Page 21

Powering up the Projector and Adjusting the Image

1Remove the lens cap.

2Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended.

3Press the Power button on the side of the projector.

•The fans start to run, the LED on the top of the projector (Figure 12 on page 18) lights green, and the startup screen appears. It takes about one minute for the image to achieve full brightness.

4If you connected a video player, turn it on.

•The video image should display on the projection screen. If it doesn’t, press the source button on the keypad (page 18) or the video button on the remote to display your video image. You can select a default source to determine which source the projector examines first during power-up for active video; see “Default Source” on page 28.

•Use the volume buttons to adjust the volume.

5Turn on your computer.

•The computer image should display on the projection screen. If it doesn’t, press the source button on the keypad or the computer button on the remote to display your com- puter’s image. Make sure your laptop’s external video port is activated; see “Portable and Laptop Activation Chart” on page 44 for details.

•If necessary, make adjustments to the image using the pro- jector’s on-screen menus. To open the menus, press the menu button on the keypad or remote, then select the Dis- play or Image menu. For more information about the menus, see page 20.

NOTE: Always use the power cord that shipped with the projector.

NOTE: The first time you connect your computer to the projector, the computer may display a message stating that new hardware was found. The Add New Hardware Wizard may appear. Use the Wiz- ard to load the correct driver (the computer considers the projector a Plug and Play Monitor).

NOTE: With some computers, the order in which you power up the equipment is very important. Most computers should be turned on last, after all other peripherals have been turned on. Refer to your computer’s documentation to determine the correct order.

13

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Safety Certifications Declaration of Conformity Page Table of Contents Index AppendixSafety Instructions If you need assistance, call Boxlight at 1-800-762-5757or Introduction Image ResolutionCompatibility Unpacking the ProjectorAnything is missing Shipping box contents Usage Guidelines If You Need Assistance WarrantyT r o d u c t i o n T , 0 5 m Setting UP the ProjectorT t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector? Audio Adapter Composite video cable Audio cable Connecting a Video PlayerAudio Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Color Audio Menu Volume Treble BassImage Menu Manual Tracking, Horiz. Posi Horizontal position Auto source select Off Plug and Play Display messages Controls MenuRear Projection Deutsch Espanol Status Language MenuStatus Menu Time period that one video frame is displayed I n g O j e c t o r Maintenance & Troubleshooting Cleaning the LensReplacing the Projection Lamp I n t e n a n c e Troubleshooting Removing the lamp module Using the Security Lock Replacing the Batteries in the Remote ControlProblem Only the start-up screen displays Troubleshooting Problem The projector is not runningProblem The screen resolution is not right Problem Color or text not being projectedProblem Image isn’t centered on the screen Problem Image is too wide or narrow for screenProblem no sound Problem Image and menus are reversed left to rightProblem Image is noisy or streaked Problem Lamp seems to be getting dimmerProblem Lamp shuts off Appendix SpecificationsStandard Accessories ship with the projector AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F8 NCR Zeos Ctrl-Shift-D Using Video Mirroring with a PowerBook Computer Distance to Diagonal Width Height Screen ft/m Ft/m Projected Image SizeIndex D e Page D e Limited Warranty Limitation of Liability
Top Page Image Contents