For video sources, Resize allows you to select from among four different
Manual Sync
The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto Image off then back on again. If the image still looks bad, try adjusting the signal synchronization manually:
1Turn Auto Image off.
2Highlight Manual sync, then press the left or right mouse but- ton repeatedly until the image is sharp and free of streaks.
Manual Tracking
The projector adjusts tracking automatically to match the video signal from your computer. However, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, try turning Auto Image off then back on again. If the image is still bad, try adjusting the tracking man- ually:
1Turn Auto Image off.
2Highlight Manual tracking, then press the left or right mouse button repeatedly until the fuzzy vertical bars are gone.
NOTE: The Manual Sync,
Manual Tracking, Horiz. Posi-
tion and Vert. Position options are available only for analog com- puter sources. The projector sets these options automatically for dig- ital computer and video sources.
25