BOXLIGHT CD-454m manual Connecting a Video Player, Audio Adapter Composite video cable Audio cable

Connecting a Video Player

1If your video player uses a round, one-prong composite video connector, you’ll need only the audio cable, audio adapter, and composite video cable that shipped with the projector.

•If your video player uses a round, four-prong S-video con- nector, you’ll need an S-video cable in addition to the audio cable and audio adapter. The S-video cable is sold sepa- rately. (See “Optional Accessories” on page 43.)

2Plug the composite video cable’s yellow connector into the “video-out” connector on your video player (Figure 7). This connector may be labeled “To Monitor.”

•If you’re using an S-video cable, connect it to the “S-video out” connector on the video player (Figure 8).

3Plug the other yellow connector into the composite video con- nector on the projector.

•If you’re using S-video, plug the other end of the cable into

the “S-video” connector on the projector (Figure 8).

in in

audio

adapter

composite video cable

audio cable

FIGURE 7

Connecting the projector to a video player using the standard video cable (with com- posite video connector) and the audio cable and adapter

NOTE: HDTV sources must be connected to the projector using the computer cable (not a com- posite or S-video cable). See the previous pages for details on con- necting this cable.

11