BOXLIGHT CD-455m, CD-555m Controls Menu, Auto source select Off Plug and Play Display messages

Controls Menu

Display Audio Image	> Controls >		Language	Status
		Video standard
		Standby time		1 minute
		Ceiling projection		off
		Rear projection		off
		Default source		computer 1 analog
		Auto source select		off
		Plug and Play		off
		Display messages		on
		Display startup screen		on
				FIGURE 17
				Controls menu

Video Standard

When Video standard is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, or SECAM) automatically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) If the projector is unable to detect the correct standard, the colors might not look right or the image might appear “torn.” If this happens, manually select a standard by clicking the left or right mouse button and cycling through the standards.

Standby Time

This option lets you select how long the lamp stays on and the blank screen is displayed when the projector enters standby mode before the projector turns off. Select among instant, 1, 5, 10, 15 and 30 minutes and 1 and 2 hours by clicking the left or right mouse button and cycling through the options.

Ceiling Projection

When you turn Ceiling Projection on, the projector turns the image upside down for ceiling-mounted projection. Highlight Ceiling Projection, then click the left or right mouse button to turn this feature on and off.

NOTE: If you already know the video standard used in your geo- graphical area, it’s often best to manually select it.

27