Operating
Operating
Adjusting the volume
1. Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
2. Use the ▲/▼ cursor buttons to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
●When 
is selected for the AUDIO item of the SETUP menu
(32), the volume adjustment is disable.
Temporarily muting the sound
1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
●When 
is selected for the AUDIO item of the SETUP menu
(32), the volume adjustment is disable.
VOLUME
VIDEO | COMPUTER/ |
| ||
STORAGE | SEARCH |
| ||
ASPECT |
| AUTO | BLANK | |
MAGNIFY | HOME | PAGE UP | VOLUME | |
ON | ||||
|
|
| ||
OFF | END | PAGE DOWN | MUTE | |
|
|
| ||
FREEZE | MY BUTTON | KEYSTONE | ||
| 1 | 2 |
| |
POSITION |
|
| MENU | |
| ENTER |
| ||
ESC |
|
| RESET | |
▲/▼
MUTE
VIDEO | COMPUTER/ |
| |
STORAGE | SEARCH |
| |
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
OFF | END | PAGE DOWN | MUTE |
|
|
| |
FREEZE | MY BUTTON | KEYSTONE | |
| 1 | 2 |
|
POSITION |
|
| MENU |
| ENTER |
| |
Selecting an input signal
1. Press the INPUT/ENTER button on the projector. Each time you press the button, the projector switches
its input port as below.
COMPUTER IN1 COMPUTER IN2 VIDEO 
1. Press the COMPUTER/STORAGE button on the projector.
Each time you press the button, the projector switches its input port as below.
COMPUTER IN1 COMPUTER IN2 USB STORAGE
INPUT/ENTER
INPUT/LAMP 
STANDBY/ON ENTER
MENU TEMP 
POWER 
COMPUTER /STORAGE
| COMPUTER/ |
| ||
VIDEO STORAGE | SEARCH |
| ||
ASPECT |
| AUTO | BLANK | |
MAGNIFY | HOME | PAGE UP | VOLUME | |
ON | ||||
|
|
| ||
OFF | END | PAGE DOWN | MUTE | |
|
|
| ||
● If the COMPUTER/STORAGE button is pushed to switch from | 1 2 |
|
| FREEZE MY BUTTON | KEYSTONE |
a signal from the VIDEO or |
|
|
selected for the AUTO SEARCH item in the OPTION menu (37), | POSITION | MENU |
the projector will check the COMPUTER IN1 port first. If no input is | ENTER |
|
detected at the port, the projector will check other port in above order. |
|
|
●Selecting the USB STORAGE port displays the THUMBNAIL menu. For more information, please see the “USB STORAGE” (49).
(continued on next page)
14