Apple CPX1, CPX5 user manual Input Menu, Video Format, Frame Lock

8+&'1(14/#6

INPUT Menu

INPUT Menu (continued)

Item Description

Set the video format for the s-video port and video port.

(1) Use the ◄/► buttons to select the input port.

	(2) Using the ▲/▼ buttons switches the mode	58+&'1	8+&'1
	for video format.		#761
			065%
	AUTO ó NTSC ó PAL ó SECAM		2#.
			5'%#/
VIDEO FORMAT	N-PAL ó M-PAL ó NTSC4.43		065%
			/2#.
	• This item is performed only for a video signal		02#.
	from the VIDEO port or the S-VIDEO port.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.

	Using the ▲/▼ buttons turns the frame lock function on/off.
	TURN ON ó TURN OFF
	• This item can be performed only on a computer signal with a
FRAME LOCK	vertical frequency of 50 to 60 Hz.
	• When the TURN ON is selected, a moving pictures are displayed
	more smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select the TURN OFF.
	Set the computer input signal type for the ports of COMPUTER.
	(1) Use the ◄/► buttons to select a COMPUTER port to be set.
	COMPUTER IN1 ó COMPUTER IN2
	(2) Use the ▲/▼ buttons to select the computer input signal type.

AUTO ó SYNC ON G OFF

COMPUTER IN Sync on Green signal can be supported, if AUTO is selected.

•When the AUTO is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal.

•Component signal can be supported through COMPUTER IN1 port, if AUTO is selected for the COMPUTER IN1 port.

(continued on next page)

29