No Input is Detected, Sync is OUT of Range, Message

5174%'0#/'

Item

Description

Using the ▲/▼ buttons turns on/off the message function.

TURN ON ó TURN OFF

	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	“NO INPUT IS DETECTED”
	“SYNC IS OUT OF RANGE”
	“Searching….” while searching for the input
MESSAGE	“Detecting….” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the PICTURE MODE displayed by changing
	The indication of the MY MEMORY displayed by changing
	The indication of “FREEZE” and “II” while freezing the screen by
	pressing the FREEZE button.

•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (19).

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button.

The SOURCE NAME menu will be displayed.

	(2) Use the ▲/▼ buttons on the SOURCE		%1/276'4016'2%
			%1/276'4&'5-6122%
			75$5614#)'2%.'55
	NAME menu to select the port to be named
			58+&'1%#/'4#
	and press the ► button. Right side of the
			8+&'1864
	menu is blank until a name is specified.
	The SOURCE NAME dialog will be displayed.		0#/'016'2%	5'.'%6
			016'2%
	(3) The current name will be displayed on the
			#$%&'()*+,-./0
	first line. Use the ▲/▼/◄/► buttons and the		123456789:;<

			CDEFGHIJKLMNOP
	ENTER or INPUT button to select and enter		QRSTUVWXYZ[\

	characters. The RESET button can be used to
			A!
SOURCE NAME	erase 1 character at a time. The name can be a		4'5'637+6	'06'40':6

	maximum of 16 characters.		0#/'016'2%	5'.'%6

	(4) To change an already inserted character, press		0162%

	the ▲ button while the cursor is on the [A-N]		#$%&'()*+,-./0
			123456789:;<

	row to move the cursor to the name displayed on		CDEFGHIJKLMNOP
			QRSTUVWXYZ[\
	the first line and use the ◄/► buttons to select
			A!
	character to be changed. Once a character in the
			4'5'637+6	'06'40':6
	name is selected use the ▼ button to move the			5'.'%6
	cursor back down to the character entry area to		0#/'016'2%
			016'2%
	select and enter characters as described above.
			#$%&'()*+,-./0
	(5) Select	and press the ENTER or	123456789:;<

			CDEFGHIJKLMNOP
	INPUT buttons when finished entering text.		QRSTUVWXYZ[\

	To revert to the previous name without		A!

	saving changes press the ESC or ◄ button		4'5'637+6	'06'40':6
	and the INPUT button simultaneously.

“NO INPUT IS DETECTED”