Apple CPX1, CPX5 user manual Connecting your devices, About Plug-and-Play capability

Page 9

Setting up

Connecting your devices (continued)

NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.

-Some signal may need an adapter to input this projector.

-Some PCs have multiple screen display modes that may include some signals which are not supported by this projector.

-Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector’s panel resolution before being displayed.

The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical.

•While connecting, make sure that the shape of the cable's connector fits the port to connect with. And be sure to tighten the screws on connectors with screws.

•When connecting a laptop PC to the projector, be sure to activate the PC’s external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC.

•When the picture resolution is changed on a pc depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

•In some cases, this projector may not display a proper picture or display any picture on screen. For example, automatic adjustment may not function correctly with some input signals. An input signal of composite sync or sync on G may confuse this projector, so the projector may not display a proper picture.

About Plug-and-Play capability

Plug-and-Play is a system composed of a PC, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and- Play can be used by connecting this projector to a pc that is VESA DDC (display data channel) compatible.

•Take advantage of this feature by connecting an RGB cable to the COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

•Please use the standard drivers in your pc as this projector is a Plug-and-Play monitor.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Contents of package Fastening the lens coverReplacing the filter cover for bottom-up use Projector Part namesHOT 12 HOTBack Remote control Remote controlControl panel 3 4 5Arrangement Setting upOn a horizontal surface Suspended from the ceilingSetting up Connecting your devices VCR/DVDPlayer About Plug-and-Play capability Connecting your devicesConnecting power supply Using a USB storageUsing the security slot Security slotRemote control About the remote control signalPutting batteries Using as a simple PC mouse & keyboard Changing the frequency of remote control signalTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicatorSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundSelecting an input signal Searching an input signal For a PC signal or a signal from the USB Storage  For no signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring Adjusting the position Using the automatic adjustment feature For a PC signal  For a signal from the USB StorageCorrecting the keystone distortions Using the magnify featureKeystone Magnify ON/OFFTemporarily blanking the screen Freezing the screenFreeze BlankUsing the menu function Easy MenuAdvanced Menu Aspect Picture ModeAuto KeystoneEasy Menu Gamma Picture MenuSelecting a mode whose name includes Using the / buttons switches the color temperature modePicture Menu Custom and then pressing the button orMY Memory LOAD1, LOAD2, LOAD3, LOAD4SAVE1, SAVE2, SAVE3, SAVE4 Image Menu Over ScanPosition Auto Adjust PhaseImage Menu SizeProgressive Input MenuVideo NR Color SpaceInput Menu Video FormatFrame Lock Resolution Setup Menu Setup Menu VolumeAudio Blank Screen MenuStart UP Screen MenuCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Sync is OUT of Range No Input is DetectedMessage Source NameOption Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonFAN Speed Filter Message GhostKEY Lock Factory ResetRemote Freq InformationInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Setting the PasswordTurning the Password off Using the PIN Lock FunctionSecurity Registering the PIN CodeIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function USB Storage Setting the Transition Detector offDisplaying Thumbnail Menu File Format Maximum pixel sizeAudio Format Container format file extension Displaying Thumbnail Menu EnterINPUT/ENTER PJ Control items Controlling the projectorMessage Description MenuThumbnail items Displaying Thumbnail imageImage DownIcon Description Displaying Thumbnail imageSlide Show items Playing Slide showMode Playing Slide showONE Time Endless Screen EffectButton Key Config Displaying an image in full screenButton operation for still image Button operation for motion picture Displaying an image in full screenCase of replacement by yourself MaintenanceLamp Type number CPX1 DT00781 / CPX5 DT00821 Replacing the lampLamp Lamp warningAir filter Cleaning the air filterType number MU03602 Filter coverPage There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Resetting all settings Regarding the indicator lampsShutting the projector down Signal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor Space setting is not suitable Color settings are not correctly adjustedNot properly adjusted Play monitorSpecifications
Top Page Image Contents