Apple CPX5, CPX1 Electrical power cord is not plugged, These has not been properly fixed

Page 64

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

About the phenomenon confused with a machine defect, check and cope with it according to the following table.

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The electrical power cord is not plugged in.

10

 

Correctly connect the power cord.

 

 

 

The main power source has been interrupted during

 

 

operation such as by a power outage (blackout), etc.

10, 13

 

Please disconnect the power plug from the power outlet,

Power does not

and allow the projector to cool down at least 10 minutes,

 

then turn the power on again.

 

come on.

 

 

Either there is no lamp and/or lamp cover, or either

 

 

 

 

of these has not been properly fixed.

 

 

Please turn the power off and disconnect the power plug from

57

 

the power outlet, and allow the projector to cool down at least

 

45 minutes. After the projector has sufficiently cooled down,

 

 

please make confirmation of the attachment state of the lamp

 

 

and lamp cover, and then turn the power on again.

 

 

The signal cables are not correctly connected.

8

 

Correctly connect the connection cables.

 

 

Neither sounds

Signal source does not correctly work.

 

nor pictures are

Correctly set up the signal source device by referring to the

–

outputted.

manual of the source device.

 

 

The input changeover settings are mismatched.

14, 15

 

Select the input signal, and correct the settings.

 

 

 

The signal cables are not correctly connected.

8

 

Correctly connect the audio cables.

 

 

 

The MUTE function is working.

14

 

Restore the sound pressing the MUTE or VOLUME button

Sound does not

on the remote control.

 

come out.

The volume is adjusted to an extremely low level.

14

 

Adjust the volume to a higher level using the menu function

 

or the remote control.

 

 

The AUDIO setting is not correct.

32

 

Correctly set the AUDIO in the SETUP menu.

 

 

 

The lens cover is attached.

13

No pictures are

Remove the lens cover.

 

displayed.

The signal cables are not correctly connected.

8

 

Correctly connect the connection cables.

 

 

(continued on next page)

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Fastening the lens cover Contents of packageReplacing the filter cover for bottom-up use Part names ProjectorHOT 12 HOTRemote control Back Remote controlControl panel 3 4 5Setting up ArrangementOn a horizontal surface Suspended from the ceilingSetting up VCR/DVD Connecting your devicesPlayer Connecting your devices About Plug-and-Play capabilityUsing a USB storage Connecting power supplyUsing the security slot Security slotAbout the remote control signal Remote controlPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For a PC signal or a signal from the USB Storage  For no signalAdjusting the zoom and focus Adjusting the projectors elevatorFocus ring Using the automatic adjustment feature Adjusting the position For a PC signal  For a signal from the USB StorageUsing the magnify feature Correcting the keystone distortionsKeystone Magnify ON/OFFFreezing the screen Temporarily blanking the screenFreeze BlankEasy Menu Using the menu functionAdvanced Menu Picture Mode AspectAuto KeystoneEasy Menu Picture Menu GammaUsing the / buttons switches the color temperature mode Selecting a mode whose name includesPicture Menu Custom and then pressing the button orLOAD1, LOAD2, LOAD3, LOAD4 MY MemorySAVE1, SAVE2, SAVE3, SAVE4 Over Scan Image MenuPosition Phase Auto AdjustImage Menu SizeInput Menu ProgressiveVideo NR Color SpaceVideo Format Input MenuFrame Lock Resolution Setup Menu Volume Setup MenuAudio Screen Menu BlankScreen Menu Start UPMyScreen Capturing error has occurred. Please try againMyScreen registration is finished No Input is Detected Sync is OUT of RangeMessage Source NameAuto Search Option MenuAuto on Auto OFF Option MenuLamp Time MY Button ServiceFAN Speed Ghost Filter MessageFactory Reset KEY LockRemote Freq InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordUsing the PIN Lock Function Turning the Password offSecurity Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off USB StorageFile Format Maximum pixel size Displaying Thumbnail MenuAudio Format Container format file extension Enter Displaying Thumbnail MenuINPUT/ENTER Controlling the projector PJ Control itemsMessage Description MenuDisplaying Thumbnail image Thumbnail itemsImage DownDisplaying Thumbnail image Icon DescriptionPlaying Slide show Slide Show itemsPlaying Slide show ModeONE Time Endless Screen EffectDisplaying an image in full screen Button Key ConfigButton operation for still image Displaying an image in full screen Button operation for motion pictureMaintenance Case of replacement by yourselfLamp Type number CPX1 DT00781 / CPX5 DT00821 Replacing the lampLamp warning LampCleaning the air filter Air filterType number MU03602 Filter coverPage Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Resetting all settingsShutting the projector down Electrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Play monitorSpecifications
Top Page Image Contents