BenQ MP735, MP727 user manual Description of each menu

Page 52

English

Description of each menu

 

FUNCTION

DESCRIPTION (default setting/value)

 

(default setting/

 

value)

 

 

 

 

 

Wall Color

Corrects the projected picture’s color when the projection surface is

 

(Off)

not white. See "Using Wall Color" on page 40 for details.

 

 

 

 

 

 

Aspect Ratio

There are four options to set the image's aspect ratio depending on

 

(Auto)

your input signal source. See "Selecting the aspect ratio" on page 37

 

for details.

 

Keystone

Corrects any keystoning of the image. See "Correcting keystone" on

 

(0)

page 35 for details.

1.

 

 

 

 

Displays the position adjustment page. To move the projected image,

DISPLAY

Position

Adjusts the clock phase to reduce image

 

use the directional arrow keys. The values shown on the lower

 

(0)

position of the page change with every key press you made until they

 

 

reach their maximum or minimum.

menu

Phase

distortion.

(depends on the

 

 

selected input

 

 

signal)

 

 

 

 

 

H. Size

 

 

(depending on

Adjusts the horizontal width of the image.

 

the selected

 

 

 

signal)

 

 

 

 

 

Digital Zoom

Magnifies or reduces the projected image. See "Magnifying and

 

(1.0X)

searching for details" on page 36 for details.

 

 

 

 

 

 

Picture Mode

Pre-defined picture modes are provided so you can optimize your

 

(PC source:

projector image set-up to suit your program type. See "Selecting a

 

picture mode" on page 39 for details.

 

Dynamic;

 

 

2.

Video source:

 

Standard)

 

PICTURE

 

 

 

 

Reference

Selects a picture mode that most suits your need for the image quality

 

and further fine-tune the image based on the selections listed on the

 

Mode

same page below. See "Setting the User 1/User 2 mode" on page 40

 

 

for details.

menu

 

 

Brightness

Adjusts the brightness of the image. See "Adjusting Brightness" on

page 40 for details.

 

Contrast

Adjusts the degree of difference between dark and light in the image.

 

See "Adjusting Contrast" on page 40 for details.

 

 

 

Color

Adjusts the color saturation level -- the amount of each color in a

 

(0)

video image. See "Adjusting Color" on page 41 for details.

 

 

 

 

 

52 Operation

Image 52
Contents Welcome MP724/MP727/MP735 Digital ProjectorTable of contents Important safety instructions Refer servicing to qualified service personnelDo not look straight at the projector Lens during operation. The intenseEnglish Do not block the ventilation holes Ceiling mounting the projector Projector features IntroductionShipping contents Projector exterior view Rear/lower sideControls and functions Remote control Operating the Laser pointer Remote control effective range Positioning your projector Choosing a locationObtaining a preferred projected image size Aspect display area Display areaEnglish MP724/727 projection dimensions MP724MP727 MP735 projection dimensions Connecting a computer or monitor Connecting a computerConnection To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorWith a VGA to DVI-A cable Connecting Video source devices Connecting AudioBest video quality Better video qualityConnecting Hdmi source devices To connect the projector to an Hdmi source deviceConnecting DVI-I source devices To connect the projector to a DVI-I source deviceConnecting Component Video source devices To connect the projector to a Component Video source deviceConnecting S-Video source devices To connect the projector to an S-Video source deviceConnecting Composite Video source devices To connect the projector to a composite Video source deviceOperation Plug the power cord into the projectorStarting up the projector Using the menus Using a security cable lockUse / to highlight the System Setup Basic menu Leave and save the settingsSetting a password Utilizing the password functionTo leave the OSD menu, press MENU/EXIT If you forget the password Entering the password recall procedureChanging the password Enter the old passwordDisabling the password function Switching input signal Changing Color SpaceAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Correcting keystone Fine-tuning the image size and clarityThen sharpen the image by rotating the Focus ring Magnifying and searching for details Selecting the aspect ratio About the aspect ratioMP724 and MP727 MP735Picture modes for different types of signals Selecting a picture modeOptimizing the image Using Wall Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant Color3D Color Management Press MODE/ENTER and the 3D Color Management page displaysPress Its values to your preference by pressingSetting the presentation timer To cancel the timer, perform the following stepsGo to the System Setup Basic Presentation Timer menu and press ModeRemote paging operations Hiding the imageVersion PictureLocking control keys Utilizing FAQ functionFreezing the image Operating in a high altitude environment Creating your own startup screenAdjusting the sound Adjusting the sound levelTurning off the Power on/off ring tone Muting the soundPersonalizing the projector menu display Shutting down the projectorMenu operation Menu systemInformati BasicAdvanced Ring toneDescription of each menu Picture menu Source 4. System Setup menuBasic menu Temperature 3D ColorSave Settings TimerSystem Setup Basic menu Auto PowerBlank Timer Sleep TimerSystem Setup Advanced menu Reset AllStandby D Sub OutputFAQ-Image Installation Features ServiceInformation menu CurrentMaintenance Care of the projectorSetting Lamp mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Do not turn the power on with the lamp cover removed Replacing the lampTighten the screws that secure the lamp Settings page displays. Press to Setup Advanced Lamp SettingsMenu. Press MODE/ENTER. The Lamp Indicators Troubleshooting Specifications Projector specificationsDimensions Timing chart49.7 59.8 83.5 1280 x 62.8 74.9 106.571.554 84.880 122.500 640 x 480@67Hz 35.000 66.667 30.24015.63 25 or 15.63 PAL-60 15.73 NTSC4.4363.981 60.020 108.000 1280 x 79.976 75.025 135.00091.146 85.024 157.500 1024 x 768@75Hz 60.241 75.020 80.000Warranty and Copyright information Limited warrantyRegulation statements FCC statement