Description of each menu
Function
(Default setting/value)
Wall Color
(Off)
Aspect Ratio (Auto)
Auto Keystone (On)
1 Keystone | ||
. | (0) | |
DISPLAY | ||
Position | ||
| ||
menu | (0) | |
| ||
Phase (depends on the selected input signal)
H. Size
(0)
Digital Zoom (1.0X)
Description
Corrects the projected picture’s color when the projection surface is not white. See "Using Wall Color" on page 32 for details.
There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 30 for details.
Automatically corrects any keystoning of the image. See "Correcting keystone" on page 28 for details.
This function is only available on the MP776 ST.
Corrects any keystoning of the image. See "Correcting keystone" on page 28 for details.
Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is selected.
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is selected.
Magnifies or reduces the projected image. See "Magnifying and searching for details" on page 30 for details.