7.Tighten the screws that secure the lamp.
•Loose screw may cause a bad connection,
which could result in malfunction.
• Do not over tighten the screws.
8.Ensure the handle is fully laid flat and locked in place.
9.Replace the lamp cover by sliding it into place.
(a)
(b)
10.Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
11.Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12.After the startup logo, open the
displays. Press
to highlight Reset lamp timer and press Mode/Enter. A warning
message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
58 Maintenance