BenQ MP610 user manual Selecting an application mode, Switching input signal, Hiding the image

Page 31

Selecting an application mode

The projector is preset with several predefined application modes so that you can choose one to suit your operating environment and input source picture type. To select a operation mode that suits your need, press Mode. The picture modes available for different types of signals are shown below. See "Application Mode" on page

29 for details.

PC Signal Input

Brightest (default)

Presentation

sRGB/Photo

Gaming

Video

 

 

 

 

 

YPbPr / S-Video / Video Signal Input

 

 

 

 

 

 

Movie (default)

Cinema

Gaming

Photo

 

 

 

 

 

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one at a time. To cycle through the available input sources, press the Source button on the projector control panel or the remote control. The selected source name will display at the center of the screen for 3 seconds after each button press.

The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies).

The input type affects the options available for the Application Mode. See "Selecting an application mode" on page 25 for details.

Hiding the image

In order to draw the audience’s full attention to the presenter, you can use Blank to hide the screen image. Press any key on the control panel to restore the image. The word “BLANK” appears at the bottom right corner of the screen while the image is hidden. When this function is activated with video/ S-video signal connected, the audio can still be heard.

You can set the blank time in the Advance -

-> Blank Time menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen.

Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire.

Operation 25

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Welcome Disclaimer CopyrightTable of contents Supported timing for Component-YPbPr input Iv Table of contentsTable of contents Memo Vi Table of contents Important safety instructions Important safety instructionsRefer servicing to qualified service personnel But could fail if power cuts or surgesSafety Instructions Bedding or any other soft surface Safety Instructions Introduction Projector featuresIntroduction Shipping contents Lower side Projector exterior viewFront / upper side Rear sideTurns the projector on or off Controls and functionsExternal control panel Mation5Up, 6 Down 3Left, Right4 Remote controlExit II/ FreezePush the holder into the remote control Remote control effective rangeReplacing the remote control battery Pull out the battery holderChoosing a location Positioning your projectorObtaining a preferred projected image size Positioning your projector 1500 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1219Connecting a computer Connecting a computer or monitorConnection Connecting a monitor Best video quality Connecting Video source devices1080i 50/ 60 Hz Connecting a Component Video source deviceDevice Video cable Audio cables Connecting an S-Video source deviceConnecting a composite Video source device Start up Utilizing the password functionTo set a password OperationPassword set-up and return to the on-screen menu If you forget the passwordTo enter the password recall procedure To change the passwordAuto-adjusting the image Adjusting the heightFine-tuning the image size and clarity For example Correcting keystoneSwitching input signal Selecting an application modeHiding the image Shutdown Disconnect the power cord from the wall socketRemote paging operations Freezing the imageMenu system Menu operationPicture menu Using the menusKeystone Picture menu Brightness Color TempDepends on SelectedPro-Picture menu Setting menu Advance menu Economic Mode offHigh Altitude Auto Off offLamp Hour System ResolutionMode Equivalent Information menuCare of the projector MaintenanceCalculation of lamp hour Lamp informationMessage Status Replacing the lamp Disconnect the lamp connector from the projector MaintenanceMaintenance Iii. Wait about 5 seconds to let the OSD disappear Temperature informationResetting the lamp counter Restart the projectorProjector is under normal operation IndicatorsLight Status & Description Power Temp Lamp Power events Light Status & Description Power Temp Lamp Lamp eventsFor assistance Thermal eventsMaintenance Cause Remedy TroubleshootingPlug the power cord into the AC inlet on Make sure that it is switched onProjector specifications SpecificationsSupported timing for Video and S-Video inputs Timing chartSupported timing for PC input Supported timing for Component-YPbPrinputUnit mm Specifications DimensionsLimited Warranty WarrantyWarranty MIC statement Regulation StatementsFCC statement EEC statement

MP610 specifications

The BenQ MP610 is a versatile, portable projector designed to deliver high-quality visuals for both home entertainment and professional presentations. Compact and lightweight, this projector offers remarkable convenience, making it easy to transport for on-the-go use. With its sleek design, the MP610 fits seamlessly into any environment, whether it’s a small meeting room or a cozy home theater.

One of the standout features of the BenQ MP610 is its DLP (Digital Light Processing) technology, which ensures brilliant color reproduction and sharp image quality. The projector boasts a resolution of 800 x 600 pixels, providing clear and vibrant visuals that engage the audience, whether for business slideshows or movies. The 2000 ANSI lumens brightness effectively illuminates images, making it suitable for use in various lighting conditions.

The MP610 supports a variety of input options, including HDMI, VGA, and USB, allowing users to connect multiple devices such as laptops, smartphones, and tablets. This flexibility enhances its functionality, making it a perfect choice for classroom settings, corporate environments, or personal entertainment systems.

In terms of audio, the projector is equipped with built-in speakers, offering satisfactory sound for small gatherings. For larger audiences, users can easily connect external audio devices to enhance the sound experience. The MP610 also features a 2000:1 contrast ratio, ensuring deeper blacks and brighter whites, which enhances the overall viewing experience.

The lamp life of the BenQ MP610 is another impressive characteristic, offering up to 4000 hours in standard mode and even longer in economic mode. This longevity reduces the need for frequent lamp replacements, ultimately lowering operating costs and improving user convenience.

For those who need to set up quickly and efficiently, the projector includes automatic keystone correction, which adjusts the image to ensure that it maintains its optimal rectangular shape, even when positioned at an angle. This feature saves time during setup and guarantees a professional presentation every time.

Overall, the BenQ MP610 stands out as a reliable projector that combines portability, versatile connectivity, and quality performance, making it an ideal choice for anyone looking to enhance their viewing experience, whether for work or leisure. Its blend of advanced technologies and user-friendly features makes it a valuable tool for any presenter or home theater enthusiast.
Top Page Image Contents