BenQ MP610 Replacing the lamp, Disconnect the lamp connector from the projector Maintenance

Page 44

Replacing the lamp

• To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp.

•To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.

•To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces.

•To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed.

•This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner.

1.Turn the power off and disconnect the projector from the wall socket. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled.

2. Turn the projector over. Then loosen the screw on the lamp cover.

3. Remove the lamp cover from the projector.

Do not turn the power on with the lamp cover removed.

4.Disconnect the lamp connector from the projector.

38 Maintenance

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Welcome Copyright DisclaimerTable of contents Iv Table of contents Supported timing for Component-YPbPr inputTable of contents Memo Vi Table of contents Important safety instructions Refer servicing to qualified service personnelBut could fail if power cuts or surges Important safety instructionsSafety Instructions Bedding or any other soft surface Safety Instructions Introduction Projector featuresIntroduction Shipping contents Projector exterior view Front / upper sideRear side Lower sideControls and functions External control panelMation Turns the projector on or offRemote control ExitII/ Freeze 5Up, 6 Down 3Left, Right4Remote control effective range Replacing the remote control batteryPull out the battery holder Push the holder into the remote controlPositioning your projector Choosing a locationObtaining a preferred projected image size Positioning your projector Maximum zoom Minimum zoom Screen Center of lens Projection distance1219 1500Connection Connecting a computer or monitorConnecting a computer Connecting a monitor Connecting Video source devices Best video qualityConnecting a Component Video source device 1080i 50/ 60 HzConnecting an S-Video source device Device Video cable Audio cablesConnecting a composite Video source device Utilizing the password function To set a passwordOperation Start upIf you forget the password To enter the password recall procedureTo change the password Password set-up and return to the on-screen menuFine-tuning the image size and clarity Adjusting the heightAuto-adjusting the image Correcting keystone For exampleHiding the image Selecting an application modeSwitching input signal Disconnect the power cord from the wall socket Remote paging operationsFreezing the image ShutdownMenu operation Menu systemKeystone Using the menusPicture menu Picture menu Color Temp Depends onSelected BrightnessPro-Picture menu Setting menu Advance menu Mode off High AltitudeAuto Off off EconomicResolution Mode EquivalentInformation menu Lamp Hour SystemMaintenance Care of the projectorMessage Status Lamp informationCalculation of lamp hour Disconnect the lamp connector from the projector Maintenance Replacing the lampMaintenance Temperature information Resetting the lamp counterRestart the projector Iii. Wait about 5 seconds to let the OSD disappearIndicators Light Status & Description Power Temp Lamp Power eventsLight Status & Description Power Temp Lamp Lamp events Projector is under normal operationThermal events For assistanceMaintenance Troubleshooting Plug the power cord into the AC inlet onMake sure that it is switched on Cause RemedySpecifications Projector specificationsTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDimensions Unit mm SpecificationsWarranty WarrantyLimited Warranty Regulation Statements FCC statementEEC statement MIC statement

MP610 specifications

The BenQ MP610 is a versatile, portable projector designed to deliver high-quality visuals for both home entertainment and professional presentations. Compact and lightweight, this projector offers remarkable convenience, making it easy to transport for on-the-go use. With its sleek design, the MP610 fits seamlessly into any environment, whether it’s a small meeting room or a cozy home theater.

One of the standout features of the BenQ MP610 is its DLP (Digital Light Processing) technology, which ensures brilliant color reproduction and sharp image quality. The projector boasts a resolution of 800 x 600 pixels, providing clear and vibrant visuals that engage the audience, whether for business slideshows or movies. The 2000 ANSI lumens brightness effectively illuminates images, making it suitable for use in various lighting conditions.

The MP610 supports a variety of input options, including HDMI, VGA, and USB, allowing users to connect multiple devices such as laptops, smartphones, and tablets. This flexibility enhances its functionality, making it a perfect choice for classroom settings, corporate environments, or personal entertainment systems.

In terms of audio, the projector is equipped with built-in speakers, offering satisfactory sound for small gatherings. For larger audiences, users can easily connect external audio devices to enhance the sound experience. The MP610 also features a 2000:1 contrast ratio, ensuring deeper blacks and brighter whites, which enhances the overall viewing experience.

The lamp life of the BenQ MP610 is another impressive characteristic, offering up to 4000 hours in standard mode and even longer in economic mode. This longevity reduces the need for frequent lamp replacements, ultimately lowering operating costs and improving user convenience.

For those who need to set up quickly and efficiently, the projector includes automatic keystone correction, which adjusts the image to ensure that it maintains its optimal rectangular shape, even when positioned at an angle. This feature saves time during setup and guarantees a professional presentation every time.

Overall, the BenQ MP610 stands out as a reliable projector that combines portability, versatile connectivity, and quality performance, making it an ideal choice for anyone looking to enhance their viewing experience, whether for work or leisure. Its blend of advanced technologies and user-friendly features makes it a valuable tool for any presenter or home theater enthusiast.
Top Page Image Contents