BenQ MP610 user manual Lamp information, Calculation of lamp hour, Message Status

Page 43

Lamp information

Calculation of lamp hour

When the projector is in operation, the duration (by hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows:

Total (equivalent) lamp hour = hours used in Economic mode + hours used in normal mode

See "Economic Mode (off)" on page 34 for more information on Economic mode.

The lamp hour in Economic mode is calculated as 3/4 of that in normal mode. That is, using the projector in Economic mode helps to extend the lamp hour by 1/4.

Warning message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

For more detailed information on projector warnings, please refer to "Indicators" on page 41.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer.

The following Lamp warning displays will remind you to change the lamp.

Message

Status

 

 

 

 

 

The lamp has been in operation for 2800 hours.

 

 

 

 

 

 

 

 

 

 

Install a new lamp for optimal performance. If the

 

 

 

 

 

projector is normally run with "Economic Mode"

 

 

 

 

 

selected (See "Economic Mode (off)" on page 34),

 

 

 

 

 

you may continue to operate the projector until the

 

 

 

 

 

2950 hour lamp warning appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp has been in operation for 2950 hour. A

 

 

 

 

 

 

 

 

 

 

new lamp should be fitted to avoid the

 

 

 

 

 

inconvenience when the projector runs out of lamp

 

 

 

 

 

time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp has been in operation for over 3000 hours.

 

 

 

 

 

 

 

 

 

 

This message will flash in the center of the screen for

 

 

 

 

 

about 30 seconds together with the Lamp indicator

 

 

 

 

 

lighting up red for 40 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If this warning message displays, the projector will

 

 

 

 

 

 

 

 

 

 

shutdown in 40 seconds. The lamp MUST be

 

 

 

 

 

replaced before the projector will operate normally.

 

 

 

 

 

 

 

 

 

 

 

 

Maintenance 37

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Welcome Disclaimer CopyrightTable of contents Supported timing for Component-YPbPr input Iv Table of contentsTable of contents Memo Vi Table of contents Important safety instructions Important safety instructionsRefer servicing to qualified service personnel But could fail if power cuts or surgesSafety Instructions Bedding or any other soft surface Safety Instructions Introduction Projector featuresIntroduction Shipping contents Lower side Projector exterior viewFront / upper side Rear sideTurns the projector on or off Controls and functionsExternal control panel Mation5Up, 6 Down 3Left, Right4 Remote controlExit II/ FreezePush the holder into the remote control Remote control effective rangeReplacing the remote control battery Pull out the battery holderChoosing a location Positioning your projectorObtaining a preferred projected image size Positioning your projector 1500 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1219Connecting a computer Connecting a computer or monitorConnection Connecting a monitor Best video quality Connecting Video source devices1080i 50/ 60 Hz Connecting a Component Video source deviceDevice Video cable Audio cables Connecting an S-Video source deviceConnecting a composite Video source device Start up Utilizing the password functionTo set a password OperationPassword set-up and return to the on-screen menu If you forget the passwordTo enter the password recall procedure To change the passwordAuto-adjusting the image Adjusting the heightFine-tuning the image size and clarity For example Correcting keystoneSwitching input signal Selecting an application modeHiding the image Shutdown Disconnect the power cord from the wall socketRemote paging operations Freezing the imageMenu system Menu operationPicture menu Using the menusKeystone Picture menu Brightness Color TempDepends on SelectedPro-Picture menu Setting menu Advance menu Economic Mode offHigh Altitude Auto Off offLamp Hour System ResolutionMode Equivalent Information menuCare of the projector MaintenanceCalculation of lamp hour Lamp informationMessage Status Replacing the lamp Disconnect the lamp connector from the projector MaintenanceMaintenance Iii. Wait about 5 seconds to let the OSD disappear Temperature informationResetting the lamp counter Restart the projectorProjector is under normal operation IndicatorsLight Status & Description Power Temp Lamp Power events Light Status & Description Power Temp Lamp Lamp eventsFor assistance Thermal eventsMaintenance Cause Remedy TroubleshootingPlug the power cord into the AC inlet on Make sure that it is switched onProjector specifications SpecificationsSupported timing for Video and S-Video inputs Timing chartSupported timing for PC input Supported timing for Component-YPbPrinputUnit mm Specifications DimensionsLimited Warranty WarrantyWarranty MIC statement Regulation StatementsFCC statement EEC statement

MP610 specifications

The BenQ MP610 is a versatile, portable projector designed to deliver high-quality visuals for both home entertainment and professional presentations. Compact and lightweight, this projector offers remarkable convenience, making it easy to transport for on-the-go use. With its sleek design, the MP610 fits seamlessly into any environment, whether it’s a small meeting room or a cozy home theater.

One of the standout features of the BenQ MP610 is its DLP (Digital Light Processing) technology, which ensures brilliant color reproduction and sharp image quality. The projector boasts a resolution of 800 x 600 pixels, providing clear and vibrant visuals that engage the audience, whether for business slideshows or movies. The 2000 ANSI lumens brightness effectively illuminates images, making it suitable for use in various lighting conditions.

The MP610 supports a variety of input options, including HDMI, VGA, and USB, allowing users to connect multiple devices such as laptops, smartphones, and tablets. This flexibility enhances its functionality, making it a perfect choice for classroom settings, corporate environments, or personal entertainment systems.

In terms of audio, the projector is equipped with built-in speakers, offering satisfactory sound for small gatherings. For larger audiences, users can easily connect external audio devices to enhance the sound experience. The MP610 also features a 2000:1 contrast ratio, ensuring deeper blacks and brighter whites, which enhances the overall viewing experience.

The lamp life of the BenQ MP610 is another impressive characteristic, offering up to 4000 hours in standard mode and even longer in economic mode. This longevity reduces the need for frequent lamp replacements, ultimately lowering operating costs and improving user convenience.

For those who need to set up quickly and efficiently, the projector includes automatic keystone correction, which adjusts the image to ensure that it maintains its optimal rectangular shape, even when positioned at an angle. This feature saves time during setup and guarantees a professional presentation every time.

Overall, the BenQ MP610 stands out as a reliable projector that combines portability, versatile connectivity, and quality performance, making it an ideal choice for anyone looking to enhance their viewing experience, whether for work or leisure. Its blend of advanced technologies and user-friendly features makes it a valuable tool for any presenter or home theater enthusiast.
Top Page Image Contents