BenQ MP610 user manual High Altitude, Mode off, Auto Off off, Economic

Page 40

 

A mode for operation in areas like high altitude or high temperature. We

 

recommend you use the High Altitude Mode when your environment is

 

higher than 3000 feet above sea level, or is hotter than 40°C, or whenever

 

the projector will be used for extended periods of time (>10 hours)

 

without shutdown.

 

 

 

To activate the High Altitude Mode, select On by pressing Left 3/ Right

 

4on the projector or remote control. A confirmation message displays.

 

Press Auto.

 

 

 

 

 

We recommend you use the High Altitude Mode by selecting On

 

 

 

when your environment is higher than 3000 feet, or is hotter than 40°C.

 

 

 

 

Do you want to turn on High Altitude Mode?

 

 

 

 

Yes

No 5

 

High Altitude

 

 

 

 

Next time you turn on the projector, it will show a message pictured below

Mode (off)

as a reminder during the start-up.

 

 

 

 

 

Current Status

 

 

 

 

High Altitude Mode On

 

 

 

This mode is used for protecting projector from extreme environment and may cause high

 

 

 

 

fan speed.

 

 

 

 

 

 

 

Operation under "High Altitude Mode" may cause a higher decibel

 

operating noise level because of increased fan speed necessary to improve

 

overall system cooling and performance.

 

 

 

If you use this projector under other extreme conditions excluding the

 

above, it may display auto shut-down symptoms, which is designed to

 

protect your projector from over-heating. In cases like this, you should

 

switch to High Altitude mode to solve these symptoms. However, this is

 

not to state that this projector can operate under any and all harsh or

 

extreme conditions.

 

 

 

 

 

 

 

 

This function allows the projector to turn off automatically if no input

Auto Off (off)

signal is detected after a set period of time. Press Left 3/ Right 4on the

 

projector or remote control to set the duration before the projector is

 

turned off. Selecting Off disables this function.

 

 

 

 

 

 

Use this mode to reduce system noise and reduce power consumption by

Economic

20%. If this mode is activated, the light output will be reduced and result

in darker projected images.

 

 

Mode (off)

 

 

Setting the projector in Economic mode extends the lamp timer

 

 

 

 

 

automatic shutdown feature. For more information on how the total

 

 

 

lamp hour is calculated, see "Calculation of lamp hour" on page 37.

 

 

 

 

 

 

34 Operation

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Welcome Copyright DisclaimerTable of contents Iv Table of contents Supported timing for Component-YPbPr inputTable of contents Memo Vi Table of contents Important safety instructions Refer servicing to qualified service personnelBut could fail if power cuts or surges Important safety instructionsSafety Instructions Bedding or any other soft surface Safety Instructions Introduction Projector featuresIntroduction Shipping contents Projector exterior view Front / upper sideRear side Lower sideControls and functions External control panelMation Turns the projector on or offRemote control ExitII/ Freeze 5Up, 6 Down 3Left, Right4Remote control effective range Replacing the remote control batteryPull out the battery holder Push the holder into the remote controlPositioning your projector Choosing a locationObtaining a preferred projected image size Positioning your projector Maximum zoom Minimum zoom Screen Center of lens Projection distance1219 1500Connecting a computer Connecting a computer or monitorConnection Connecting a monitor Connecting Video source devices Best video qualityConnecting a Component Video source device 1080i 50/ 60 HzConnecting an S-Video source device Device Video cable Audio cablesConnecting a composite Video source device Utilizing the password function To set a passwordOperation Start upIf you forget the password To enter the password recall procedureTo change the password Password set-up and return to the on-screen menuAuto-adjusting the image Adjusting the heightFine-tuning the image size and clarity Correcting keystone For exampleSwitching input signal Selecting an application modeHiding the image Disconnect the power cord from the wall socket Remote paging operationsFreezing the image ShutdownMenu operation Menu systemPicture menu Using the menusKeystone Picture menu Color Temp Depends onSelected BrightnessPro-Picture menu Setting menu Advance menu Mode off High AltitudeAuto Off off EconomicResolution Mode EquivalentInformation menu Lamp Hour SystemMaintenance Care of the projectorCalculation of lamp hour Lamp informationMessage Status Disconnect the lamp connector from the projector Maintenance Replacing the lampMaintenance Temperature information Resetting the lamp counterRestart the projector Iii. Wait about 5 seconds to let the OSD disappearIndicators Light Status & Description Power Temp Lamp Power eventsLight Status & Description Power Temp Lamp Lamp events Projector is under normal operationThermal events For assistanceMaintenance Troubleshooting Plug the power cord into the AC inlet onMake sure that it is switched on Cause RemedySpecifications Projector specificationsTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDimensions Unit mm SpecificationsLimited Warranty WarrantyWarranty Regulation Statements FCC statementEEC statement MIC statement

MP610 specifications

The BenQ MP610 is a versatile, portable projector designed to deliver high-quality visuals for both home entertainment and professional presentations. Compact and lightweight, this projector offers remarkable convenience, making it easy to transport for on-the-go use. With its sleek design, the MP610 fits seamlessly into any environment, whether it’s a small meeting room or a cozy home theater.

One of the standout features of the BenQ MP610 is its DLP (Digital Light Processing) technology, which ensures brilliant color reproduction and sharp image quality. The projector boasts a resolution of 800 x 600 pixels, providing clear and vibrant visuals that engage the audience, whether for business slideshows or movies. The 2000 ANSI lumens brightness effectively illuminates images, making it suitable for use in various lighting conditions.

The MP610 supports a variety of input options, including HDMI, VGA, and USB, allowing users to connect multiple devices such as laptops, smartphones, and tablets. This flexibility enhances its functionality, making it a perfect choice for classroom settings, corporate environments, or personal entertainment systems.

In terms of audio, the projector is equipped with built-in speakers, offering satisfactory sound for small gatherings. For larger audiences, users can easily connect external audio devices to enhance the sound experience. The MP610 also features a 2000:1 contrast ratio, ensuring deeper blacks and brighter whites, which enhances the overall viewing experience.

The lamp life of the BenQ MP610 is another impressive characteristic, offering up to 4000 hours in standard mode and even longer in economic mode. This longevity reduces the need for frequent lamp replacements, ultimately lowering operating costs and improving user convenience.

For those who need to set up quickly and efficiently, the projector includes automatic keystone correction, which adjusts the image to ensure that it maintains its optimal rectangular shape, even when positioned at an angle. This feature saves time during setup and guarantees a professional presentation every time.

Overall, the BenQ MP610 stands out as a reliable projector that combines portability, versatile connectivity, and quality performance, making it an ideal choice for anyone looking to enhance their viewing experience, whether for work or leisure. Its blend of advanced technologies and user-friendly features makes it a valuable tool for any presenter or home theater enthusiast.
Top Page Image Contents