Ampro Corporation 5001451A manual Flat Panel/CRT Display Controller, MBps Ethernet LAN Interface

Page 12

Flat Panel/CRT Display Controller

A 69030 video display controller supports both flat panels and CRTs, and offers full software compatibility with all popular PC video standards (VGA, Super VGA, and VESA). All standard resolutions up to 1600x1200 pixels at 64K colors for CRTs and up to 1280x1024 pixels at 16.7M colors for flat panels are supported. 4MB of SDRAM are provided as standard video memory. The display controller features are:

!Enhanced AGP Bus Interface – The video controller provides a 66MHz AGP-bus path between the CPU and the controller.

!Full IBM VGA compatibility – VESA DPMS and DCC standards supported.

!Color Flat Panel Support – Up to 16.7 million colors can be displayed on color TFT LCD flat panels and color STN LCD panels.

!Dual Independent Displays – The controller provides three different modes, which include two completely separate and independent video displays (CRT and flat panel) with resolutions up to 1280x1024 at 256 colors at 60Hz.

–Dual-Pipe Simultaneous Mode – This mode provides the same image on both displays and each display (CRT or flat panel) can operate at its optimum timing.

–Dual-Pipe Mosaic Mode – This mode provides two displays with completely different images on each display and each display can be configured at its optimum resolution/timing.

–Virtual Desktop Mode – This mode provides a single image or desktop spanned across the two displays.

!Automatic Power Sequencing Controls. The video controller provides the signals to safely sequence the power and data signals to LCD flat panels.

!Low-Power Modes. The Advanced Power Management (APM) and Advanced Configuration and Power Management Interface (ACPI) compliant features are implemented in the power control logic.

!ZV Port Support. The standard ZV input port for PCMCIA is supported.

100 MBps Ethernet LAN Interface

The Ethernet subsystem is based on the Intel 82559ER 10/100BaseT PCI Ethernet Controller. It fully supports IEEE 802.3 Ethernet standards - 10BaseT and 100BaseT. Features of this Ethernet controller include:

!Chained memory structure

!Full Duplex support at 10 and 100Mbps

!IEEE 802.3u Auto-negotiable support

1-4

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Little Board P6d Reference Manual Revision Reason for Change Date Copyright 2000, 2002, Ampro Computers, IncorporatedTable of Contents Preface ROM Bios Standards Contact Information Cables Index Page Introduction Technical SupportWebsite Surface MailViii Product Feature Summary General DescriptionCPU/Motherboard Enhanced Embedded-PC Bios Modular PC/104-Plus Expansion BusCompactFlash Disk Serial Ports Parallel PortFloppy Interface PCI-Bus Eide InterfacesFlat Panel/CRT Display Controller MBps Ethernet LAN InterfaceSoftware Designing Little Board SystemsEnhanced Reliability On-board MiniModule ExpansionLittle Board Development Platform And QuickStart Kit I/O Development BoardConnector Descriptions J2 PowerConnector Name Description Pin # SignalSwitch Descriptions S1 S5 J3 MiscJ4 Keyboard J5 MouseSystem Block Diagram Page Mounting Dimensions OverviewLittle Board P6d Module with Mounting Dimensions Connector Summary Connector Function Size Key PinPage Little Board P6d Connector and Jumper Locations Jumper Group Function Default Jumper SummaryDC Power Power RequirementsPin # Signal Name Function Connector Type Mating ConnectorSwitching Power Supplies Powerfail NMIBackup Battery Cooling RequirementsFan Connector System MemoryPin # Function Bios Recovery Interrupt and DMA Channel UsageShadowing Interrupt Function Battery-Backed Clock Serial PortsChannel Function ROM-BIOS Installation of the Serial Ports Serial Port Connectors J8, J11Addresses and Interrupt Assignments Port Address InterruptPorts Pin # Signal Name Function In/Out DB25 Pin DB9 Pin Signal DB25Ports Pin # Name Function Ampro Custom Serial Features Serial Console FeaturesSerial TTL Option Jumper ResultUsing a Standard PC Keyboard Using Arrow Keys During Setup Universal Serial Bus USB PortsCOM Port Table Function Substitute KeysIrDA Connector Part of Utility J19 J4 Pin # Signal Name FunctionJ5 Pin # Signal Name Function Infrared IrDA InterfaceROM-BIOS Installation of Parallel Ports J19 Pin # Signal Name FunctionMulti-Mode Parallel Port Addresses and InterruptsParallel Port Connector J9 DMA ChannelsPin # Signal Name Function In/Out DB25 Pin IEEE-1284-compliant CablesUsing the Parallel Port in Bidirectional Mode Latch-Up ProtectionParallel Port Registers Standard and Bidirectional OperationUsing the Control Lines for Additional I/O Enabling the Parallel Port Interrupt22. Parallel Port Register Bits Floppy Interface Configuration Floppy Disk InterfaceFloppy Drive Considerations Capacity Drive Size Tracks Data RateFloppy Interface Connector J14 Pin # Signal Name Function In/OutEide Hard Disk Interface Pin # Signal Function Name IDE Interface Configuration Master/Slave SettingCompactFlash Solid-State Disk Enabling the DriveAudio Interface Connector Audio InterfaceAudio Amplifier Connector Function Type Signals Audio Interface Adapter Schematic Pin # Signal Function Flat Panel/CRT Video ControllerConnecting a Flat Panel J15 Name Connector Pins/Type DescriptionPower Sequencing Advanced Power ManagementBios Support of Standard Flat Panels Connecting a CRT J17Pin # Signal Name DB-15 ZV Port Interface J16J6 Pin # Name Function Ethernet RJ45 Interface Connector J13 Ethernet Network InterfaceDisabling the Video Controller Hardware DescriptionEthernet Interface Software Manufacturers Ethernet IDNetwork Operating Systems Network OS DriversWatchdog Timer Ethernet SetupEthernet Indicator LEDs Color Designation FunctionUtility Connectors J19 38. Utility Connector J19 Push-button Reset Connection LED ConnectionSpeaker Connections Keyboard ConnectionMiscellaneous Power Management Signals PC/104-Plus Expansion BusIrDA Interface TTL Serial PortsUsing Standard PC and AT Bus Cards Expansion Bus Connector PinoutsPin # Signal Name Function Pin # Signal Function Name Pin 12VSetup Setup HelpMenu Name Functions Setup 1 Main Menu ↑ ↓ → ←Setup 2 Standard Cmos Setup Eide Hard Disk DrivesDrive Selection Setup 3 Bios Features Setup VideoSerial Console Operation during Setup Setup 4 Chipset Features Setup 10. Setup 4 Chipset Features SetupSetup 5 Power Management Setup 11. Setup 5 Power Management SetupPage Setup 6 PCI Configuration Setup 12. Setup 6 PCI Configuration SetupSetup 7 Integrated Peripherals Setup Integrated Peripherals SetupPanel # Panel Class Other Setup Screens Load Setup Defaults ScreenIDE HDD Auto Detection Screen Save & Exit Setup Screen Exit Without Saving ScreenLittle Board P6d Technical Specifications Embedded-PC System EnhancementsOn-board Peripherals Mechanical and Environmental Specifications Support SoftwareBios Modes Flat Panel DisplaysSupported CRT Video Modes-Standard VGA Supported CRT Video Modes-Low Resolution Supported CRT Video Modes-Extended Modes 46h Generic 32K 8x16 Hardware IRQ Map IRQ #Page Appendix a Standards Contact Information EPP and ECP OperationPage Appendix B Cables Page Cable Setup Index Setup summary Shadowing Index Index-4

5001451A specifications

Ampro Corporation is known for its commitment to quality and innovation, particularly in the field of embedded computing solutions. One of its standout products, the Ampro Corporation 5001451A, is a robust and versatile embedded computing platform designed to meet the demanding needs of industrial applications.

The 5001451A features a compact and modular design that allows for flexibility and ease of integration into various systems. It is built around a powerful processor, ensuring high performance for data-intensive operations. This embedded platform can support various operating systems, giving developers the freedom to choose the environment that best suits their project requirements. Additionally, the system's architecture is optimized for low power consumption, which is critical for applications where energy efficiency is paramount.

One of the key characteristics of the 5001451A is its extensive I/O capabilities. It includes multiple ports for serial communication, USB, and Ethernet, making it highly adaptable for different connectivity needs. The system also supports various expansion options, allowing users to add additional functionalities as required. This adaptability is essential for industries such as telecommunications, transportation, and medical devices, where specific operational demands vary widely.

Moreover, the 5001451A is designed with durability in mind. It can operate effectively in challenging environments, with features such as extended temperature ranges and resistance to shock and vibration. This ruggedness makes it an ideal choice for deployment in outdoor installations or industrial settings where equipment is subjected to harsh conditions.

The product also integrates advanced security features to protect against cyber threats, which is increasingly important in today's connected world. With built-in encryption and secure boot capabilities, the 5001451A ensures that sensitive data is safe and that the system remains reliable against unauthorized access.

In summary, the Ampro Corporation 5001451A stands out as a powerful, flexible, and reliable embedded computing solution. Its combination of performance, modularity, durability, and security makes it an excellent choice for a wide range of industrial applications, making it a go-to option for developers and engineers seeking a dependable embedded platform. With the ongoing advancements in technology, the 5001451A is well-positioned to adapt to future challenges and opportunities in the ever-evolving landscape of embedded systems.
Top Page Image Contents