Ampro Corporation 5001451A manual Ethernet Network Interface, Disabling the Video Controller

Page 55

Little Board P6d Module

Table 2-35. J6 Mating Connector

Mating Connector

Discrete Wire:

Molex Housing

51110-2650

Molex Pin

50394-8051

Disabling the Video Controller

The video controller can be disabled in Setup. There are no jumpers to change.

Ethernet Network Interface

This section describes the hardware of the Ethernet interface and discusses relevant software considerations.

Hardware Description

The Ethernet subsystem is based on the Intel 82559ER 10/100BasetT PCI Ethernet Controller. The Ethernet controller fully supports IEEE 802.3 Ethernet standards, and supports standard 10BaseT and 100BaseT via a standard RJ45 connector.

The Ethernet controller interfaces to the PCI portion of the bus. Features of this controller include:

!Speed auto-negotiation (complies with IEEE802.3 standard)

!Full-duplex operation at 10 Mb/s and 100 Mb/s

!Low-power energy modes

Ethernet RJ45 Interface Connector (J13)

The Ethernet connector is a standard RJ45 jack for connecting directly to an Ethernet network using category 5 UTP/STP cabling.

Table 2-36lists the signals and pin numbers of the Ethernet connector:

Table 2-36. Ethernet RJ45 Connector (J13)

Pin #

Function

 

 

1

TX +

 

 

2

TX -

 

 

3

RX +

 

 

6

RX -

 

 

4, 5, 7, 8

Signal Common

 

 

2-37

Image 55
Contents Little Board P6d Reference Manual Copyright 2000, 2002, Ampro Computers, Incorporated Revision Reason for Change DateTable of Contents Preface ROM Bios Standards Contact Information Cables Index Page Surface Mail IntroductionTechnical Support WebsiteViii General Description Product Feature SummaryCPU/Motherboard Modular PC/104-Plus Expansion Bus Enhanced Embedded-PC BiosCompactFlash Disk PCI-Bus Eide Interfaces Serial PortsParallel Port Floppy InterfaceMBps Ethernet LAN Interface Flat Panel/CRT Display ControllerOn-board MiniModule Expansion SoftwareDesigning Little Board Systems Enhanced ReliabilityI/O Development Board Little Board Development Platform And QuickStart KitPin # Signal Connector DescriptionsJ2 Power Connector Name DescriptionJ5 Mouse Switch Descriptions S1 S5J3 Misc J4 KeyboardSystem Block Diagram Page Overview Mounting DimensionsLittle Board P6d Module with Mounting Dimensions Connector Function Size Key Pin Connector SummaryPage Little Board P6d Connector and Jumper Locations Jumper Summary Jumper Group Function DefaultConnector Type Mating Connector DC PowerPower Requirements Pin # Signal Name FunctionCooling Requirements Switching Power SuppliesPowerfail NMI Backup BatterySystem Memory Fan ConnectorPin # Function Interrupt and DMA Channel Usage Bios RecoveryShadowing Interrupt Function Serial Ports Battery-Backed ClockChannel Function Port Address Interrupt ROM-BIOS Installation of the Serial PortsSerial Port Connectors J8, J11 Addresses and Interrupt AssignmentsSignal DB25 Ports Pin # Signal Name Function In/Out DB25 Pin DB9 PinPorts Pin # Name Function Jumper Result Ampro Custom Serial FeaturesSerial Console Features Serial TTL OptionUsing a Standard PC Keyboard Function Substitute Keys Using Arrow Keys During SetupUniversal Serial Bus USB Ports COM Port TableInfrared IrDA Interface IrDA Connector Part of Utility J19J4 Pin # Signal Name Function J5 Pin # Signal Name FunctionAddresses and Interrupts ROM-BIOS Installation of Parallel PortsJ19 Pin # Signal Name Function Multi-Mode Parallel PortDMA Channels Parallel Port Connector J9IEEE-1284-compliant Cables Pin # Signal Name Function In/Out DB25 PinStandard and Bidirectional Operation Using the Parallel Port in Bidirectional ModeLatch-Up Protection Parallel Port RegistersEnabling the Parallel Port Interrupt Using the Control Lines for Additional I/O22. Parallel Port Register Bits Capacity Drive Size Tracks Data Rate Floppy Interface ConfigurationFloppy Disk Interface Floppy Drive ConsiderationsPin # Signal Name Function In/Out Floppy Interface Connector J14Eide Hard Disk Interface Pin # Signal Function Name Enabling the Drive IDE Interface ConfigurationMaster/Slave Setting CompactFlash Solid-State DiskAudio Interface Audio Interface ConnectorAudio Amplifier Connector Function Type Signals Audio Interface Adapter Schematic Flat Panel/CRT Video Controller Pin # Signal FunctionName Connector Pins/Type Description Connecting a Flat Panel J15Advanced Power Management Power SequencingConnecting a CRT J17 Bios Support of Standard Flat PanelsZV Port Interface J16 Pin # Signal Name DB-15J6 Pin # Name Function Hardware Description Ethernet RJ45 Interface Connector J13Ethernet Network Interface Disabling the Video ControllerNetwork OS Drivers Ethernet Interface SoftwareManufacturers Ethernet ID Network Operating SystemsColor Designation Function Watchdog TimerEthernet Setup Ethernet Indicator LEDsUtility Connectors J19 38. Utility Connector J19 Keyboard Connection Push-button Reset ConnectionLED Connection Speaker ConnectionsTTL Serial Ports Miscellaneous Power Management SignalsPC/104-Plus Expansion Bus IrDA InterfaceExpansion Bus Connector Pinouts Using Standard PC and AT Bus CardsPin # Signal Name Function Pin # Signal Function Name 12V PinSetup Help SetupMenu Name Functions ↑ ↓ → ← Setup 1 Main MenuEide Hard Disk Drives Setup 2 Standard Cmos SetupDrive Selection Video Setup 3 Bios Features SetupSerial Console Operation during Setup 10. Setup 4 Chipset Features Setup Setup 4 Chipset Features Setup11. Setup 5 Power Management Setup Setup 5 Power Management SetupPage 12. Setup 6 PCI Configuration Setup Setup 6 PCI Configuration SetupIntegrated Peripherals Setup Setup 7 Integrated Peripherals SetupPanel # Panel Class Load Setup Defaults Screen Other Setup ScreensIDE HDD Auto Detection Screen Exit Without Saving Screen Save & Exit Setup ScreenEmbedded-PC System Enhancements Little Board P6d Technical SpecificationsOn-board Peripherals Support Software Mechanical and Environmental SpecificationsFlat Panel Displays Bios ModesSupported CRT Video Modes-Standard VGA Supported CRT Video Modes-Low Resolution Supported CRT Video Modes-Extended Modes 46h Generic 32K 8x16 IRQ # Hardware IRQ MapPage EPP and ECP Operation Appendix a Standards Contact InformationPage Appendix B Cables Page Cable Setup Index Setup summary Shadowing Index Index-4

5001451A specifications

Ampro Corporation is known for its commitment to quality and innovation, particularly in the field of embedded computing solutions. One of its standout products, the Ampro Corporation 5001451A, is a robust and versatile embedded computing platform designed to meet the demanding needs of industrial applications.

The 5001451A features a compact and modular design that allows for flexibility and ease of integration into various systems. It is built around a powerful processor, ensuring high performance for data-intensive operations. This embedded platform can support various operating systems, giving developers the freedom to choose the environment that best suits their project requirements. Additionally, the system's architecture is optimized for low power consumption, which is critical for applications where energy efficiency is paramount.

One of the key characteristics of the 5001451A is its extensive I/O capabilities. It includes multiple ports for serial communication, USB, and Ethernet, making it highly adaptable for different connectivity needs. The system also supports various expansion options, allowing users to add additional functionalities as required. This adaptability is essential for industries such as telecommunications, transportation, and medical devices, where specific operational demands vary widely.

Moreover, the 5001451A is designed with durability in mind. It can operate effectively in challenging environments, with features such as extended temperature ranges and resistance to shock and vibration. This ruggedness makes it an ideal choice for deployment in outdoor installations or industrial settings where equipment is subjected to harsh conditions.

The product also integrates advanced security features to protect against cyber threats, which is increasingly important in today's connected world. With built-in encryption and secure boot capabilities, the 5001451A ensures that sensitive data is safe and that the system remains reliable against unauthorized access.

In summary, the Ampro Corporation 5001451A stands out as a powerful, flexible, and reliable embedded computing solution. Its combination of performance, modularity, durability, and security makes it an excellent choice for a wide range of industrial applications, making it a go-to option for developers and engineers seeking a dependable embedded platform. With the ongoing advancements in technology, the 5001451A is well-positioned to adapt to future challenges and opportunities in the ever-evolving landscape of embedded systems.