INSTALLATION SET UP
Scan adaptation
The scanning can be switch by turning the Horizontal and Vertical scan connectors and the convergence connectors.
To change the scanning, it is necessary to open the projector top cover and to rotate the chassis.
For opening the projector's top cover, see Getting access to controls.
WARNING
TURN OFF PROJECTOR AND UNPLUG THE POWER CORD BEFORE CHANGING THE SCAN DIRECTION.
Getting access to the scan connectors and the convergence connectors.
-Open the top cover and to remove it, see Getting access to controls.
-To open the chassis, loosen both indicated retaining screws
RS232 IN RS232 OUT | COMM PORT | REMOTE R G(S) B | S VIDEO |
(800 peripherals) |
Turn the chassis to the front of the projector until it grips in its locks.
INSTALLATION SET UP
| 5975069ABARCOVISION708200498 | |
|