POWERCONNECTION
POWERCONNECTION
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector.
See installation instructions before connecting to the supply
|
|
|
|
| V NOM 120/230 Volt | |
OFF |
| ON | I MAX | 5/2.5 AMP | ||
| FREQ | 60/50 Hz | ||||
|
|
|
|
| ||
See installation instructions before connecting to the supply
|
|
|
|
|
|
| V NOM 120/230 Volt | |
|
|
|
|
|
|
| I MAX | 5/2.5 AMP |
|
|
|
|
|
|
| ||
OFF ON FREQ | 60/50 Hz | |||||||
Input power (mains) voltage.
Attention
The BARCOVISION 708 - R9002327 and R9002328 leave the factory to operate on a mains (power) input of 120 Vac.
Fuses
Warning
For continued protection against fire hazard :
-replace with the same type of fuse
-refer replacement to qualified service personnel
Fuse type : 2 x T5A/250V (Barco order number : R314104)
| 5975069ABARCOVISION708200498 | |
|