INSTALLATION ADJUSTMENTS
Raster centering
The raster must be centered on the CRT screen surface of each tube, therefore, it is necessary to look into the lenses.
Caution : To avoid eye discomfort while performing these adjustments, reduce the contrast and gradually increase the brightness level until the raster becomes visible behind the image.
Warning : In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the phos- phor area of the CRT.
Press ENTER to display the raster on the green CRT.
Look into the green lens and shift the raster with the control disc until it is centered in the middle of the CRT faceplate.
RASTER CENTERING
CONTRAST LEVEL IS REDUCED
AND BRIGHTNESS INCREASED TO MAKE THE RASTER VISIBLE ON THE FACE PLATE OF EACH CRT.
USE THE ARROW KEYS TO CENTER THE RASTER ON THE GREEN, RED AND BLUE CRT RESPECTIVELY
<ENTER> to continue <EXIT> to return
INSTALLATION ADJUSTMENTS
forbidden area
projected raster
crt faceplate border
phosphor border
234
| 5975069ABARCOVISION708200498 | |
|