Onkyo HT-RC370 Connecting the AV Receiver, Connecting Your Speakers, Screw-type speaker terminals

Page 12

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.

Front high	Front wide			Front wide	Front high
right	right	Front right	Front left	left	left	Center

Surround	Surround	Surround	Surround
right	back right	back left	left

■Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

■Banana Plugs (North American models)

1/2" to 5/8" (12 to 15 mm)

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

Image 12

Contents HT-RC370 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features Services available may vary depending on the regionAmplifier ProcessingTHX Select2 Plus Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesRear Panel Front L/R, CENTER, Surr L/R, SB/FH/FW* L/R, SubwooferZone 2 Line OUT jacks Remote Controller Controlling the AV ReceiverDimmer button Display button Muting button Controlling the tunerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Number SpeakersUsing Dipole Speakers Using a Powered SubwooferBi-amping the Front Speakers TipConnecting a Power Amplifier Connecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Audio Return Channel ARC functionJack Components Assignable Audio Return Channel is set to AutoConnecting Your Components E F G HHow to record a video source Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordBe careful not to injure yourself when using thumbtacks Plug the power cord into an AC wall outletTurning On/Off the AV Receiver Turning OnTurning Off AV receiver comes on, the display lightsSelecting the Language for the Onscreen Setup Menus Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Playing a USB Device Listening to Internet RadioListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure First measurement positionWhen you’ve finished making the settings, press Adjust the subwoofer volume level to 75 dB` Cancel Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDTS DSD*6Listening Mode Description Input Speaker Source Layout Neo6 Audyssey DSX *8THX Listening Mode Description Input Speaker Source Layout Using the Home Menu Using the Sleep TimerSetting the Display Brightness Using Headphones Displaying Source InformationChanging the Input Display Selecting Speaker LayoutUsing Easy Macros RecordingAdvanced Setup On-screen Setup MenusExplanatory Notes MenuResolution Input/Output AssignMonitor Out Hdmi InputComponent Video Input Digital Audio InputAnalog Audio Input ` IN1, IN2Speaker Setup Speaker SettingsSpeaker Distance Equalizer Settings THX Audio SetupLevel Calibration Audio Adjust Multiplex/MonoDolby BGCDimension Dolby VolumeVolume Leveler Half ModeSource Setup Theater-DimensionalAudyssey DSX LFE LevelDynamic Volume Reference LevelIntelliVolume SyncName Edit Picture Adjust Charge Mode Fixed ModeCharge Mode Audio SelectorListening Mode Preset Volume SetupMiscellaneous DTS/DTS-ES/DTS-HDHardware Setup OSD Setup TunerRemote ID Auto Standby Firmware Update NetworkDhcp Remote Controller Setup Lock SetupUsing the Audio Settings Late Night Music OptimizerRe-EQ Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierZone Making Zone 2 ConnectionsAdjusting the Volume for Zone Operating on the remote controllerControlling Zone 2 Components Muting ZoneUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock Controlling Your iPod/iPhone RI DockAvailable buttons RandomPreprogrammed Remote Control Codes Looking up for Remote Control CodeEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsEnter Setup Search Repeat Random Mode VCR/PVR8SOURCE*1 Input Guide TOP MenuLearning Commands Deleting Acquired CommandsFollowing buttons cannot learn new commands RemoteUsing Normal Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting PowerAudio There’s no sound with a certain signal format Can’t select the Pure Audio listening modeSpeaker volume cannot be set as required About DTS signalsRemote Controller VideoTuner UP-A1 Dock for iPod/iPhone RecordingZone Music Server and Internet RadioUSB Device Playback OthersImportant Note Regarding Video Playback Component Video Monitor OUTFirmware Update Update procedureUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkError Code Description Updating the Firmware via USBErrors during an update via USB Onkyo Sound & Vision CorporationConnection Tips and Video Signal Path Signal SelectionVideo Connection Formats Audio Connection Formats OUTVideo Resolution Chart OutputOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iUsing an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerAbout Hdmi Supported Audio FormatsAbout Copyright Protection Network/USB Features Connecting to the NetworkNetwork Requirements Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaSpecifications Amplifier Section Tuner SectionVideo Section GeneralAudio Outputs Others4 0 0 7 3

Related manuals

Manual 2 pages 53.77 Kb

HT-RC370 specifications

The Onkyo HT-RC370 is a versatile and feature-rich AV receiver designed to enhance the home theater experience. Launched as a part of Onkyo’s acclaimed lineup, this receiver provides high-quality audio and video processing capabilities to satisfy both casual viewers and audiophiles alike.

One of the main features of the HT-RC370 is its support for both 7.2 channel surround sound and multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio. This ensures immersive soundscapes for movies, music, and games, delivering a cinema-like experience right at home. The receiver offers a potent 100 watts per channel, which guarantees powerful sound output, making it suitable for various room sizes.

The HT-RC370 takes advantage of Onkyo’s advanced audio processing technologies, such as Audyssey MultEQ room correction. This system analyzes the acoustics of the space and automatically adjusts the speakers for optimal sound performance, significantly improving overall sound quality. Additionally, the receiver supports two subwoofers, enhancing low-frequency performance and creating a more balanced sound stage.

In terms of connectivity, the Onkyo HT-RC370 features an extensive range of options. It includes multiple HDMI inputs and outputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all while supporting 3D video and 4K upscaling capabilities. Other connectivity options include analog and digital audio inputs, as well as components like USB ports for easy access to music files.

An intuitive GUI (Graphical User Interface) enhances usability, and it provides straightforward control for both audio and video settings. The receiver also includes built-in network capabilities for streaming music from various online sources, such as Spotify and Pandora, providing flexibility for music lovers.

In summary, the Onkyo HT-RC370 combines robust features, advanced audio technologies, and extensive connectivity options to create an exemplary audio-visual experience. Whether you are hosting movie nights or enjoying your favorite music, this receiver provides the power, performance, and flexibility needed to elevate any entertainment setting.