CONNECTING POWER TO THE PROJECTOR
The power cord receptacle, AC POWER switch, and circuit breaker are located next to the connector panel of the projector.
Video 1 | |
| Audio |
Computer 1 Audio
Computer 1 In
Video 2 |
Audio
Computer 2 Audio
Computer 2 In
Aux Port
Mic Cyclops
Audio Out
Video Out
Circuit Breaker
AC Power Switch
Power Receptacle
Figure 2-7 Power receptacle, AC Power switch, and circuit breaker reset switch
1Plug the appropriate power cord into the power receptacle on the side of the projector.
2Connect the power cord to a
CONNECTING COMPUTER VIDEO
Connecting a PC
Use the included VGA video cable to connect your PC to the projector. Use your existing monitor cable to connect the projector to a separate monitor, so that you can use your monitor and DP4100/4200 at the same time.
VGA
VGA
VGA Connector Cable