Proxima ASA 4100/4200 manual Connecting Computer Audio, 13Computer 1 & 2 Audio ports

NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA cable adapter to the computer’s VIDEO OUTPUT port (or video adapter cable).

1Plug the COMPUTER end of the VGA cable into the computer’s VGA or Video Out port or into the Mac - VGA cable adapter (Macintosh only).

2Plug the end of the supplied VGA cable with the large round collar into the COMPUTER 1 IN port on the projector.

3Connect your audio source to the COMPUTER AUDIO 1 ports on the projector.

4Turn the projector on and press the key.

NOTE: If your projector is unable to project an image at the same time your laptop monitor displays an image, refer to your laptop documentation for information on switching between the internal screen and the video port.

Special Configurations

If your computer has an internal monitor but no external video capability (Macintosh Performa 575, PowerMac 5200, and certain PowerBooks), you need a video adapter card in order to attach the DP4100/4200.

Setup for a third-party adapter is identical to the procedures outlined in the Quick Start section in Chapter 1. Contact your dealer, Proxima Customer Service, or a third-party supplier for more information about an appropriate video adapter.

CONNECTING COMPUTER AUDIO

Connect audio inputs from a computer to the COMPUTER 1 & 2 AUDIO ports with the supplied audio cable.

Computer 1 Audio

Computer 1 In

Computer 2 Audio

Computer 2 In

Figure 2-13Computer 1 & 2 Audio ports

1Insert the mini-jack end of the computer audio cable into the AUDIO OUT port of a Macintosh or the sound card of a PC.

2-10Chapter Two