JVC GY-HD201CHE manual Outputting Audio, Connecting the Video, Signal Cables, Displaying Alarms

PLAYBACK MODE

USING EXTERNAL COMPONENTS

Outputting Audio

Setting

1.Display the AUDIO menu screen.

Select the AUDIO item on the TOP MENU screen.

2.Set the AUDIO menu screen.

• PB AUDIO CH [DV] Items

CH1/2	: To reproduce the sound (CH-1, CH-2)
	recorded during shooting.
MIX	: To reproduce the sound recorded during

	Displaying Alarms
Connecting the Video
	• CHANGE 1394 SWITCH
Signal Cables	Displayed when the setting for the input/output video format
	from the IEEE1394 connector and the setting for the
	IEEE1394 switch are different.
	Set the IEEE1394 switch so it matches the video format.

Confirm that this device is in the VTR mode. (VTR indicator: On)

	MONITOR		VTR indicator
	SELECT switch
			VF BRIGHT
	USER 1	USER 2	USER 3
SHUTTER	2		- +
	ND FILTER		LCD BRIGHT
				CAM/VTR
dial	1
		MENU	AUDIO SELECT	TC

CH-1 CH-2 DISPLAY GENE.

TC

UB

STATUS

STATUS button

POWERREC

CAM/VTR button

AUDIO menu screen

„Earphone terminal output audio

Audio output is as shown in the table below depending on the MONITOR SELECT switch and AUDIO MONITOR and PB AUDIO CH [DV] settings on the AUDIO menu screen.

		shooting (CH-1, CH-2) and the after-
		recorded sound (on CH-3 and CH-4)
		simultaneously.
CH3/4	: To reproduce the sound after-recorded
		on CH-3 and CH-4.
PB AUDIO CH [DV]		AUDIO OUT connector
		CH-1	CH-2
CH1/2		CH1	CH2
MIX		CH1+CH3	CH2+CH4
CH3/4		CH3	CH4

For HDV format, audio is output to CH1 and CH2 no matter the settings.

3.Either of the following operations returns you to the nor- mal screen.

•Press the STATUS button or

•Return to the TOP MENU screen, select the EXIT item and press the SHUTTER dial.

MEMO

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. This device records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.)

When this device is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-4 channels, the PB AUDIO CH [DV] item on the AUDIO menu screen must be set.

After-recording on the CH-3 and CH-4 channels is not pos- sible.

Connecting the IEEE1394 Cable

To reduce the emission of unwanted radio waves, be sure to attach the provided clamp filter as shown in the figure below.

•Attach the clamp filter as close to this device as possible, as shown in the figure.

•Set the IEEE1394 switch on the left panel of this device.

DV	: DV format
HDV	: HDV format
		IEEE1394 switch
Clamp filter
		VIDEO
	Wind once	CH2-AUDIO OUT-CH1
		IEEE 1394

CAUTION

When connecting the IEEE1394 cable from/to Camcorder, VCR and other IEEE1394 device, make sure the following instructions, otherwise the IEEE1394 circuit device may be destroyed.

•Turn the power of both devices OFF and connect the IEEE1394 cable.

•Do not insert incorrectly (in reverse) the IEEE1394 cable end to IEEE1394 port of both devices.

	IEEE 1394
X	1394

C H A N G E 1 3 9 4 S W I T C H

MONITOR	PB AUDIO CH [DV]	CH1/2	MIX	CH3/4
SELECT	AUDIO MONITOR
CH-1	-	L/R: CH1	L/R: CH1+CH3	L/R: CH3
BOTH	MIX	L/R: CH1+CH2	L/R: CH1+CH2+CH3+CH4	L/R: CH3+CH4
	STEREO	L: CH1 R:CH2	L: CH1+CH3 R: CH2+CH4	L: CH3 R: CH4
CH-2	-	L/R: CH2	L/R: CH2+CH4	L/R: CH4

* In HDV format, you can only select the settings within the bold frame.

IEEE

•Do not connect the IEEE1394 cable under the condition of static electricity.

•Turn the power of both devices OFF when changing the IEEE1394 switch from/to HDV/DV.

62 63