CONTROLS, INDICATORS AND CONNECTORS
Left Side Section
•Set the [AUDIO INPUT] switch 3 according to the device to be connected.
•Set the
The
5Shoulder pad slide button
Button to adjust the position of the shoulder pad.
a
VIDEO |
CH1 |
9 8 7
IEEE 1394 
1
2
3
When you press this button, you can move the position of the shoulder pad 6 forward or backward.
6Shoulder pad
7Cassette cover
Sliding the EJECT switch a on page 18 located on the top section opens this cover to allow insertion or removal of the videocassette.
CAUTION
To prevent foreign objects from entering the internal parts of the VTR unit, do not leave this device with the cover open
c
d |
b | |
IEEE 1394 |
|
0 6 5
4
for extended periods of time.
a[IEEE1394] IEEE1394 switch
1Viewfinder connector
Connect the cable from the viewfinder here.
2[CH-2 INPUT] CH-2 audio input connector selector switch
Selects the
INPUT1 : Inputs the audio from the INPUT1 connector
4into
INPUT2 : Inputs the audio from the INPUT2 connector
4into
MEMO
The audio from the INPUT1 connector is also input into
3[AUDIO INPUT] Audio input signal selector switch This switch is used to select the input sound signal from INPUT1 or INPUT2 connector.
LINE | : Set to this position when connected to audio |
| equipment, etc. The reference input level is |
| +4 dBs. |
MIC | : Set to this position when the dynamic micro- |
| phone is connected. |
MIC+48V : Set to this position when a microphone requiring +48 V power supply (phantom microphone, etc.) is connected.
CAUTION
When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected.
MEMO
You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2] menu screen.
X See page 84.
4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec- tors
These are audio input connectors for connecting to an external audio device or microphone.
8[VIDEO OUT] Video output terminal (RCA)
This is a terminal for composite video signal output.
•Select whether or not to output a signal with setup in SET UP on the VIDEO FORMAT[2/2] menu screen. (Only for U model)
•Set ANALOG OUT CHAR. item on the OTHERS[1/2] menu screen to ON to output menu setting screens and warnings from this terminal.
9[AUDIO OUTPUT CH-1/CH-2] Audio output connector (RCA)
Output connector for audio signals.
•Outputs the input audio signal in the Camera mode.
•Outputs the playback audio signal in the VTR mode.
•When a HDV/DV signal (IEEE1394) is input, the EE sound of the input audio signal is output in the VTR mode. (HDV/DV signal input is possible with the
MEMO
Alarm sound is not output.
0[IEEE1394] IEEE1394 connector (6-pin)
Using an IEEE1394 cable (optional), a digital video com- ponent with IEEE1394 connector can be connected here. X See “Connecting the IEEE1394 Cable” on page 63.
X See “HDV/DV Dubbing” on page 65.
CAUTION
When connecting the IEEE1394 cable, confirm that the connector is facing the right direction before inserting.
X See page 63.
MEMO
Put the covers on the connectors when you are not using them.
Set according to the image format of the input/output sig- nal and playback signal of the IEEE1394 terminal.
HDV | : Set to this for HDV format. |
DV | : Set to this for DV format. |
b[Y/PB/PR] Component Y/PB/PR signal output terminal (BNC × 3)
Outputs analog component (Y/PB/PR) signals.
•Select whether or not to add setup signals to DV format signals in SET UP item on the VIDEO FORMAT[2/2] menu screen. (Only for U model)
•Set ANALOG OUT CHAR. item on the OTHERS[1/2] menu screen to ON to output menu setting screens and warnings from this terminal.
c[REMOTE] REMOTE terminal (Round 6-pin)
Some functions of this camera can be controlled exter- nally.
Connect to a remote control unit
d[DC INPUT] DC input terminal (XLR 4-pin)
This is the 12V DC power input terminal. Connect to the AC adapter.
When a battery is installed and a cable is connected to this terminal, power supply from the battery stops and power is supplied by this terminal.
16 | 17 |
