JVC GY-HD201CHE, GY-HD200E Basic System Attaching the Zoom Lens, How to Attach the View, Finder

PREPARATIONS

Basic System

Attaching the Zoom Lens

1. 3. Knob 2. Microphone

Microphone XLR 3P

Focus Manual Unit

*1 HZ-FM13 (FUJINON) HZ-FM15 (CANON)

1/3 Zoom Lens

Th13 × 3.5BRMU (FUJINON)

Shoulder Belt

HD-SD Cable

BNC

Component Cable

BNC

Monitor

Composite Cable

RCA pin

Earphone

Audio Cable

RCA pin

Monitor

			HDD Unit
Microphone		IEEE1394 Cable	DR-HD100
	GY-HD250/GY-HD251	6P-6P
		For GY-HD250

1.Loosen the mount ring.

2.Attach the lens with its pin aligned with the hole in the mount.

3.Tighten the mount ring.

4.Connect the cable connector.

5.Clamp the lens cable.

Hole

Pin

Clamp

Microphone holder

5. Clamp

4.INPUT1, 2 connector

How to Attach the View-

Wide Converter

WCV-82SC

Focus Manual Unit *1

Zoom Servo Unit

HZ-ZS13B

1/3 Zoom Lens
Th16 × 5.5BRMU (FUJINON)
(Excluding the CHU/CHE model)		Battery mount
		GY-HD250: Gold Mount
	SD Memory Card	GY-HD251: V Mount
GY-HD250/GY-HD251	Tripod Base (U model only)
Standard Package

Anton Bauer

Anton Bauer Battery Charger

Battery

For GY-HD251

IDX

IDX (Endura) Battery Charger

Battery

DV VTR

BR-HD50

Non-linear Editing System

CAUTION

•Be sure to tighten the mount ring completely. Incomplete tightening may result in the lens dropping off or disturbed back focus.

•Set the GY-HD250/GY-HD251’s power switch to “OFF” before the zoom lens is attached or detached.

finder

1.To attach the viewfinder, slide it in the direction of the arrow.

2.Set the viewfinder to a comfortable position and then turn the slide mounting ring and mount.

„ To take off the viewfinder, pull the knob in the direction of

Mount Converter (1/2r1/3): ACM-12 (2/3r1/3): ACM-17

Tripod 1/2 Zoom Lens

S14	× 7.3B12U (FUJINON)
S17	× 6.6BRM (FUJINON)
S20	× 6.4B12U (FUJINON)

YH16 × 7K12U (CANON)	Carrying Case
YH19 × 6.7K12U (CANON)
2/3 Zoom Lens
	Dolly

XLR 4P

AC Adapter

AC

Remote Control Unit RM-LP55/RM-LP57

Attaching the Microphone (Provided)

Connect the provided microphone to the microphone holder. Provided microphone is a phantom microphone.

the arrow as you slide the viewfinder.

Knob

Taking off the viewfinder

2. Slide mounting ring

Headset

DT109 (Beyerdynamic)

View Finder	Camera Remote Control Unit
VF-P400	RM-P210
View Finder	Studio Kit
DM-3106 (Astrodesign)
	KA-HD250
V-R70P-HAD (Marshall Electronics)
	Monitor

*1 An HZ-FM13 cannot be used with a Th16 × 5.5BRMU or S14 × 7.3B12/U zoom lens. Use a FUJINON focus manual unit (FMM-8, CFH-3, CFC-12-990).

For details, please consult your JVC authorized dealer.

1.Turn the knob on the microphone holder anticlockwise to loosen it and open the microphone holder.

2.Place the microphone in the microphone holder.

Place the microphone toward the front to prevent it from interfering with the cassette cover.

3.Turn the knob on the microphone holder clockwise to secure the microphone.

4.Connect the microphone cable to the INPUT1 or INPUT2 input connector on the GY-HD250/GY-HD251.

5.Attach the microphone cable to the clamp.

6.Make sure to perform the correct setting for use of a phantom microphone.

X See page 56.

1.

32 33